Ok i just bought a new receiver and my only issue is going to be that it will sit in a wood cabinet and the IR Receiver wont be in view so probably wont work. The back of the receiver has a 3.5mm IR IN Seen here(http://insigniaproducts.com/cms/documen ... G%20EN.pdf) on page 2, my question is i was looking at (http://www.bestbuy.com/site/SpeakerCraf ... &cp=1&lp=8) or similar to plug into that 3.5mm port so that the receiver would be in site of the remote. The remote im going to Use is the Harmony 650. That Speakercraft adapter says "Requires regulated power supply, terminator block and emitter (not included)". Do i need any of these? Can you explain what these are? or can i just plug that 3.5mm in and it will work? Thanks

_________________
2008 KK Liberty
Inferno Red
Daystar 2" Spacer Lift With SkyJacker Hydro Shocks
JBA Gen 5.5 Upper Control Arms
Rokmen Riddler 8.25 Differential Cover
2 KC Slimlite 100 Watt Driving Lights on JK Light Bar
245/75/16 All Terrains
Mopar Front Tow Hooks
Mopar Rear Tow Hook
Mopar Skids

i would go with something like this
http://www.parts-express.com/pe/pshowdetl.cfm?&DID=7&Partnumber=182-448&ctab=1#Tabs


they sell good stuff i have never been un-happy with any purchase from them

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.

I have one of these for the last 4 years, works great

Hot Link Pro

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.

Thanks for all the replies, anymore are welcome

_________________
2008 KK Liberty
Inferno Red
Daystar 2" Spacer Lift With SkyJacker Hydro Shocks
JBA Gen 5.5 Upper Control Arms
Rokmen Riddler 8.25 Differential Cover
2 KC Slimlite 100 Watt Driving Lights on JK Light Bar
245/75/16 All Terrains
Mopar Front Tow Hooks
Mopar Rear Tow Hook
Mopar Skids

Your receiver will provide the power & terminator block, *provided that the plug is compatible with your receiver*. The emitter would be your remote control.

_________________
Take the road less traveled.