BDS Lift kit
Front:
Bilstein F4-BE5-D916-HO Front struts.
Terraflex extended front bumps stops.
2 Conduit nuts each side.

Rear:
3 Isolators each side.
2 Hockey pucks each side.

Didn't have time to get Boiler's Spacers. Had to order bolts to fit it from a different company. It takes Carriage bolts.

Height now: 18" all around.

Thanks for all the advice that I have read here.

_________________
First Ones In, Last Ones Out. We Will Never Forget. "343"

05 Sport Lifted
BDS Lift Kit
235/70/16 Big O A/T Tires on stock rims
100w Driving Lights on Homemade light bar
55w Driving Lights on homemade light bar for Back-up lighting
Cobra 40ch CB w/Weather
Engine, Transmission, and Transfer Case Skid Plates

pics?

_________________
Silver '04 Renegade

No Luck with the lift. Big "O" tires said the front springs were too long. Guess I will have to take it back where they shipped the kit. Bummer

_________________
First Ones In, Last Ones Out. We Will Never Forget. "343"

05 Sport Lifted
BDS Lift Kit
235/70/16 Big O A/T Tires on stock rims
100w Driving Lights on Homemade light bar
55w Driving Lights on homemade light bar for Back-up lighting
Cobra 40ch CB w/Weather
Engine, Transmission, and Transfer Case Skid Plates

Big "O" tires probably is unfamiliar with what a lift spring is

bds does apparently use a "drop cup" front upper plate tho?

I'd get a 2nd opinion before sending it back, there's people running that lift with no problems

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632

2nd opinion coming tomorrow from Maximum Security. That's where the kit was shipped to. They are the distributor in this area.

_________________
First Ones In, Last Ones Out. We Will Never Forget. "343"

05 Sport Lifted
BDS Lift Kit
235/70/16 Big O A/T Tires on stock rims
100w Driving Lights on Homemade light bar
55w Driving Lights on homemade light bar for Back-up lighting
Cobra 40ch CB w/Weather
Engine, Transmission, and Transfer Case Skid Plates

See thats the problem most shops know nothing at all about doing a lift on a Liberty.
Take one look and run away!
Thats why you do it right and do it yourself!
Make sure they know that two of the bolts on each one have to be installed before it all goes together ( the springs/shocks)

BDS does use a "drop cup" design.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

They had one side all installed, but couldn't get it to go into place. The Spring was rubbing on the body, and also it looked loike on the UCA. Sorry I didn't get pictures of it, but I was upset that it wouldn't go together. My mistake.

_________________
First Ones In, Last Ones Out. We Will Never Forget. "343"

05 Sport Lifted
BDS Lift Kit
235/70/16 Big O A/T Tires on stock rims
100w Driving Lights on Homemade light bar
55w Driving Lights on homemade light bar for Back-up lighting
Cobra 40ch CB w/Weather
Engine, Transmission, and Transfer Case Skid Plates