I'm in MOAB hanging with the homies and we decided to do Potash to Shaffer Trail. I was rallying through the twisties in Fulltime and when we hit Shaffer, I put 'er in 4LO. About 1/4 of the way up I rolled down the windows and heard a fairly loud rhythmic squeak (see subject line). Once we got to the top, I put it into Fulltime and the noise went away. It seemed to be coming from the front end but it's hard to say. There's no noise in 2WD, I have not tried Partime. The noise was louder than the stereo at volume 16. Any ideas?


Holla

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

I should add the noise was only there when the vehicle was in motion.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

Stock stereo volume 16 or ultra high power JL Audio volume 16?

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green

I'd be checking the front driveshaft,CV joints,and front hub bearings.

I can buy that but why only in 4 Lo?

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

The later yo..... you know how I roll...

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

I'm more concerned that it's the t-case since it's only 4 LO love.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

Found a new front driveshaft and it will be in MOAB Sat 1:30 PM. I'll remove the shaft (gigity) in the AM, have a look and see if the noise persists when in 4 LO.

Thanks for the advice.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

Upon initial inspection, the boot which usually corrodes away (on driveshaft) seems perfect and there's no noise driving in straight lines on the street in 4 LO. I am sure something will crop up again on the trails.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

Spent the day on Fins n Things and no problems... not sure what the deal is.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

Maybe you had a rock or something jammed somewhere it was not supposed be.

I find that when I run in very fine sand or dust for a few miles, I get this sqeak noise until I flush it out. If it were all the time, I might suspect the brake pad clip, warning of worn pads.

_________________
2006 Sport CRD

Could the Aztecs have known, that in 2012 after a 4 year experiment, our country would cease to exist?

The noise came back on sunday about 3/4 of the way through elephant hill. On the same trail, kskj developed the same noise as well so I am going with hub bearing or simply sand.

I guess it wouldn't hurt to replace some hub bearings that have seen nearly 100K miles especially if you have an instict that they MIGHT be going!

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

Hub bearings as in wheel bearings?

I'm at 130K miles on my 2006... both front bearings replaced at around 110-120K... that symptom was ungodly low pitch noises at highway speeds....

When I wheel it is at a former silica sand quarry. I am familiar with the squeek... but mine is more subtle...

HTH

_________________
2008 VW Rabbit- 5-speed 5-cylinders
2000 TJ 4-cylinders 5-speed I'll let you know when I figure it out.
2006 Liberty SOLD.

My squeak went away after the long drive home. Must of been sand.

_________________
2003 KJ Renegade, 5 speed, frankenlifted,Al's a Arms 4.5,Moabs 245/75/16 BFG KM2's, custom rock rails, full Mopar skids, Hella ff220 lights,Hd cooling,Front DTT,Riddler diff cover,Rola safari rack,Cobra 29 peaked & tuned.

Pastafari Alum, Pink shovel recipient