I finally got them and installed them. I love them. The brake line routing recommended did not work at all with my 9000xl's so I moved it to the outside of the Knuckle. Great product in my opinion. Also I had to modify my tool the cup as too tall to easily work with.




and yes I cleaned up the cables tied them together and added some extra high pressure line over the rubber brake hose to protect it. All my mods where done with the sway bar off and the suspension completely un-loaded. checked line tension at full lock.

so with the sway bar disconnected does sway bar just sit there and clunk around or does it stay in place somehow?

Thought I had a Better pic of it but no it has a Lanyard cable that holds the Bar up. looks close in this photo but thats full lock Full down travel I checked it moves away as the knuckle travels up.

Also The ABS Tab you can see on the knuckle has to be removed. Also With the links on and extended the Front end travels better with the links attached even. In my opinion also proven on a Ramp I found.