If you want to measure some things, that would help with an estimate of when it would be coming, but I'd still have to get personal with one.

Basically dimensions between all bolts would be the initial question. pitch of the roof at each point is the #2, but I'd have to measure that.

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options

well im about to go to work so if someone doesnt get some measurements today ill get them late tonight when i get off.

well thats all i needed to hear Looks like the Jeeps gunna have to wait for that mod, but i think its time for some performance upgrades

_________________
3.5in RK lift
245/75/16 firestone destination MT
16in cragar soft 8s
black horse grill guard
2 hella 500s

Boiler,

I'm always up for a road trip if you want some KK measurements. You did such a nice job putting my rear cargo trim back together I think I'd trust you with the roof rails. Maybe you can look the underneath over for a possible KK radiator skid as well? I'm on summer break from teaching. A few family commitments here and there. Let me know if or when you might want to compare calender dates. I know you have LOTS of stuff you're already working on.

Take care,

ds

_________________
08 Liberty Sport,Red Rock
4spd auto, 2.5" JBA lift w/ 5.5 UCAs, Bilstiens, MOPAR skids, JCR stage 2 rock rails, Cooper AT3's 255/70/16
Tow Pkg, Frnt tow hooks, Thule roof bars/canoe and kayak carrier, sunroof, pet divider, 115lbs lab

das4x4- there are no holes for the rad skid like on the KJ that I'm aware of however there is a factory mopar radiator skid available for the KK and maybe, haven't seen under, the KJ.




I took some approx measurements before I left for work. Across the front bolts is ~49, rear is ~46 and length from most forward to most aft bolts is ~60.

I live under a rock and don't get out much sometimes I'll have to look the skid up. Thanks Dirty

_________________
08 Liberty Sport,Red Rock
4spd auto, 2.5" JBA lift w/ 5.5 UCAs, Bilstiens, MOPAR skids, JCR stage 2 rock rails, Cooper AT3's 255/70/16
Tow Pkg, Frnt tow hooks, Thule roof bars/canoe and kayak carrier, sunroof, pet divider, 115lbs lab

Thanks, I'm emailing these numbers to myself right now

I'll take you up on this once we get another rack done. Probably in a few weeks.

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options

while everyone is on the subject.... whats the best way to remove the top rack screw covers on a stock kk without damage?

_________________
Light travels faster than sound.... This is why some people appear bright until you hear them speak.

they pull straight up. Might seem like they'll break but they just yank off.

thanks, dirtykk.... I am hoping to remake my rack... or should I say "wanna be rack" from the factory... but maintain the original components for possible resale ... I am aiming towards the similar idea... low-profile unit, possibly no side walls. (got a few ideas bouncing around upstairs...)

_________________
Light travels faster than sound.... This is why some people appear bright until you hear them speak.