It is currently Sat Sep 26, 2026 10:05 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Sun Sep 05, 2010 6:20 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
Testing Shows 16 Percent of Oils Fail API SM Specification

"According to the Institute of Materials (IOM), testing shows that of the 250 off-the-shelf motor oils that claim to meet the API SM specification, 16 percent do not. According to Mary Herrmann, IOM general manager in Midland, Mich., 40 motor oils failed at least one of the specification limits.


"This shows the challenge for API,” said Herrmann. “They also gather samples from the marketplace and do testing, but we're still seeing oils that are off-spec which carry the ILSAC and API marks on the labels.”


AMSOIL synthetic motor oils meet or exceed minimum API SM specifications, and the company’s rigorous quality control program ensures each quart delivers superior protection and performance."

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Sun Sep 05, 2010 7:43 pm 
Offline
LOST Addict
User avatar

Joined: Mon Jan 29, 2007 12:54 am
Posts: 3865
Location: Draper, UT
Sounds complicated

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Sun Sep 05, 2010 7:49 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
JL Rockies wrote:
Sounds complicated


It may sound complicated, but there’s a point to be made. There has been many debates on this forum about whether or not Amsoil meets specifications without being API approved. But as you can see, not every API approved oil meets specifications.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Sun Sep 05, 2010 7:57 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun May 17, 2009 6:09 pm
Posts: 584
Location: Clayton, North Carolina
You don't happen to have a link to the testing do you? That way we can all see what oil's placed where?!?!?!?!?!

_________________
Zack A.
2005 Rocky Mountain Ed.
W4ZWA


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Sun Sep 05, 2010 8:26 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Amsoil doesn't have more then half of it's fluids even tested to be API certified so that's not saying a whole lot for them.


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Sun Sep 05, 2010 11:41 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
Zack A wrote:
You don't happen to have a link to the testing do you? That way we can all see what oil's placed where?!?!?!?!?!


No, it was an article that I read. I wish I knew……….

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Mon Sep 06, 2010 12:04 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
tjkj2002 wrote:
Amsoil doesn't have more then half of it's fluids even tested to be API certified so that's not saying a whole lot for them.


tjkj already knows this answer, but this info is for those who don't:

"Why Some AMSOIL Synthetic Motor Oils Are API Licensed And Some Are Not

1. Full API licensing puts AMSOIL INC. in an inflexible position. Not only would we find it necessary to buy formula components from specific vendors and be at the mercy of their pricing, we would not be able to make any major improvements to the lubricant formulas for 2 to 3 years, without new testing and the associated costs. To solve this problem, the API must establish basestock interchange guidelines for synthetic basestocks just as they have for other basestocks, as well as develop interchange guidelines for other components too.

2. Full API licensing would impose strict phosphorous limitations on our motor oils. This limitation is the main reason most AMSOIL motor oils are not API licensed. AMSOIL INC. currently disagrees with this limitation and feels strongly that the reduced wear and longer oil and additive life achieved through higher levels of properly balanced phosphorous content is more important than the arbitrary API phosphorous limit that does not give any consideration to the NOACK volatility level of an oil. When chemistry is developed that will provide superior engine wear protection with reduced phosphorous levels, or Noack volatility considerations are put in place, then the phosphorous level will become a non-issue."

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Mon Sep 06, 2010 3:32 pm 
Offline
LOST Member
User avatar

Joined: Fri Jul 06, 2007 11:22 am
Posts: 201
Location: Richmond, VA
Zack A wrote:
You don't happen to have a link to the testing do you? That way we can all see what oil's placed where?!?!?!?!?!


Since you asked, a lot of technical information on Amsoil and its competitors can be found here:
http://bestsyntheticoil.com/dealer-1858578.php

_________________
2002 Jeep Liberty Sport with Trak-Loc
3" lift: OME struts, springs and shocks; Jeepin by Al UCAs and strut spacers
Full skids by Rusty's Offroad and Mopar
245/75/R16 Dunlop A/Ts on Procomp Soft 8s
A few lights and performance mods.

http://www.alphaomegaoffroad.com

Image


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Mon Sep 06, 2010 5:28 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
I'd prefer to hear argument over which wax has the best UV protection :P

The whole blah blah API this API that, gets real old

We all know once we pick a favorite oil, regardless of the reasons, we are very unlikely to budge and will always reinforce our "sleeping good at night" by disregarding anything a competitor company produces

just stay away from Dino castrol or you'll be scooping the sludge out of your valve covers with a kitchen spoon :P Other than that, mobil, valvoline, amsoil all have good oils

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Mon Sep 06, 2010 9:13 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
kvenner wrote:
Zack A wrote:
You don't happen to have a link to the testing do you? That way we can all see what oil's placed where?!?!?!?!?!


Since you asked, a lot of technical information on Amsoil and its competitors can be found here:
http://bestsyntheticoil.com/dealer-1858578.php

Notice that all Amsoil "tests" are done by them,or paid by them to have done.They don't even make there own oil,they buy it and mix it together and do not warraty anything and yes I have seen them deny there so called warranty.


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Tue Sep 07, 2010 11:20 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
api isn't the end all beat all by any means, otherwise, you wouldn't stick to Mobil 1, you'd use whatever has an API but you don't and there's a reason, there's plenty of crap oil that makes it through API

Amsoil has API on some of their oils, the ones with chose high phosphorous (which is good ) do not, the API low phosphorous ppm requirement was done for enviro reasons via our favorite dolts and has no interest what so ever in our engines lasting

Whats the difference in them paying a lab to do testing and other oil companies paying API a heck of a lot more to do tests that may or MAY NOT mean jack in terms of wear preventive, so.. in that aspect.. why should they waste the money on something that means nothing more than exactly what you just said "they paid to have it tested.."

So far nothing you've said condemning amsoil doesn't apply to Mobil 1 and every other oil company in existence, Penzoil doesn't brew their own 'new' big dog synthetic either

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Tue Sep 07, 2010 12:12 pm 
Offline
LOST Member
User avatar

Joined: Fri Jul 06, 2007 11:22 am
Posts: 201
Location: Richmond, VA
tjkj2002 wrote:
Notice that all Amsoil "tests" are done by them,or paid by them to have done.


Almost all products are tested in one of two ways: either in internally by there own R&D department, or by a paid independent lab. The difference between Amsoil and other brands is that Amsoil publishes the results of their testing. I've never seen such test results published by any of the major brands. If you have some of these test results, I would like to be able to see them so that I could be fully informed.

Quote:
They don't even make there own oil,they buy it and mix it together


Using this logic, Chrysler doesn't make Jeeps, because they use parts made in Mexico and china.

Quote:
and do not warraty anything and yes I have seen them deny there so called warranty.


Please let me know the specifics of when and why they denied a warranty claim. If Amsoil has a history of this, I certainly don't want to keep doing business with them.

_________________
2002 Jeep Liberty Sport with Trak-Loc
3" lift: OME struts, springs and shocks; Jeepin by Al UCAs and strut spacers
Full skids by Rusty's Offroad and Mopar
245/75/R16 Dunlop A/Ts on Procomp Soft 8s
A few lights and performance mods.

http://www.alphaomegaoffroad.com

Image


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Tue Sep 07, 2010 12:17 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
Oooohh, another oil thread!

:POPCORN:

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Tue Sep 07, 2010 3:31 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 04, 2005 8:37 pm
Posts: 7928
Location: Big Bear & Lancaster, Ca.
linewarbr wrote:
Oooohh, another oil thread!

:POPCORN:


:dead:

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Tue Sep 07, 2010 4:48 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 06, 2009 7:35 pm
Posts: 4576
I saw engine cut aways (chevy 350's) years ago showing cylinder wear after 100,000 or 200,00 miles (can't remember). Still had machine marks and running smooth when they cut them apart on the engine running AMSOIL. The other engines were either blown or severly scored with bad cylinder leak down. That's why I still use AMSOIL after 15 years and never had a problem.
The one vehicle I got away from AMSOIL, a 98 Pontiac Transport, I listened to a hard core ASE Master Certified tech and used Mobil !, the cam broke in half..........


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Tue Sep 07, 2010 5:46 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
BugginKJ wrote:
I saw engine cut aways (chevy 350's) years ago showing cylinder wear after 100,000 or 200,00 miles (can't remember). Still had machine marks and running smooth when they cut them apart on the engine running AMSOIL. The other engines were either blown or severly scored with bad cylinder leak down. That's why I still use AMSOIL after 15 years and never had a problem.
The one vehicle I got away from AMSOIL, a 98 Pontiac Transport, I listened to a hard core ASE Master Certified tech and used Mobil !, the cam broke in half..........


Amen Brother……… :JEEPIN:

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Tue Sep 07, 2010 7:09 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
kvenner wrote:

Please let me know the specifics of when and why they denied a warranty claim. If Amsoil has a history of this, I certainly don't want to keep doing business with them.

They denied any type of warranty on my buddies '70 Nova engine(555 cu in) when the cam bearings ate themselfs,they did not spin and had about 70psi of oil pressure and running Amsoil 20w-50 oil and a Amsoil filter.The reason they denied was he changed his oil to often,every 500 miles.This was not in a race either,he actually never raced the engine yet and it had 2500miles on it at the time.After paying for a new block and cam he had a NGK spark plug fall apart and NGK had no problem buying him a new engine,they did not even flinch and he had the engine in less then 2 weeks.Sad part was he was sponsered by Amsoil and they told him to piss off,he has never used Amsoil since then(about 7 years now) and that lead to over 3/4 of Amsoil use to disappear in my hometown area from his word of mouth.


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Wed Sep 08, 2010 10:33 am 
Offline
LOST Member
User avatar

Joined: Fri Jul 06, 2007 11:22 am
Posts: 201
Location: Richmond, VA
tjkj2002 wrote:
kvenner wrote:

Please let me know the specifics of when and why they denied a warranty claim. If Amsoil has a history of this, I certainly don't want to keep doing business with them.

They denied any type of warranty on my buddies '70 Nova engine(555 cu in) when the cam bearings ate themselfs,they did not spin and had about 70psi of oil pressure and running Amsoil 20w-50 oil and a Amsoil filter.The reason they denied was he changed his oil to often,every 500 miles.This was not in a race either,he actually never raced the engine yet and it had 2500miles on it at the time.After paying for a new block and cam he had a NGK spark plug fall apart and NGK had no problem buying him a new engine,they did not even flinch and he had the engine in less then 2 weeks.Sad part was he was sponsered by Amsoil and they told him to piss off,he has never used Amsoil since then(about 7 years now) and that lead to over 3/4 of Amsoil use to disappear in my hometown area from his word of mouth.


What was Amsoil sponsoring?

_________________
2002 Jeep Liberty Sport with Trak-Loc
3" lift: OME struts, springs and shocks; Jeepin by Al UCAs and strut spacers
Full skids by Rusty's Offroad and Mopar
245/75/R16 Dunlop A/Ts on Procomp Soft 8s
A few lights and performance mods.

http://www.alphaomegaoffroad.com

Image


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Wed Sep 08, 2010 4:32 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
Maybe they didn't like his cam bearing clearance, just shooting in the dark here, I've seen many a pro screw that one or perhaps they felt since they sponsored him and he had yet to race it after 2500 miles, that the sponsorship money was good enough?

Amsoil had no issues with the oil warranty on the sportsman race boat motor that they didn't have a sponsor on for the gentleman that lives across the street from me in New Bern but he was within the moderately accepted 0025 and 003

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632


Top
 Profile  
 
 Post subject: Re: Testing Shows 16% of Oils Fail API SM Specification
PostPosted: Wed Sep 08, 2010 9:08 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
JeepinJarhead03 wrote:
Maybe they didn't like his cam bearing clearance, just shooting in the dark here, I've seen many a pro screw that one or perhaps they felt since they sponsored him and he had yet to race it after 2500 miles, that the sponsorship money was good enough?

Amsoil had no issues with the oil warranty on the sportsman race boat motor that they didn't have a sponsor on for the gentleman that lives across the street from me in New Bern but he was within the moderately accepted 0025 and 003

That was not his race engine,the engine that went was the "back up" engine used for poker runs and car shows.The cam and cam bearings where a matched set from Crane.The race engine did not ever run Amsoil,used straight 30 weight oil in the race engine.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com