It is currently Sun Nov 08, 2026 10:35 am

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KK Discussion---2008-2012 Liberty/Cherokee Models

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
Marlon_JBT
 Post subject: Um, is this normal? Should there be a plug here?
PostPosted: Sun Oct 10, 2010 8:31 pm 
Offline
LOST Addict

Joined: Sat Sep 17, 2005 9:56 am
Posts: 1773
Location: Detroit or Ypsilanti, MI
Fooling around with the new LOST KK, I was attempting to install my amplifier and subwoofers from the WK. I was looking for that little plug that everyone goes through the firewall with, found it but I also found something different...

This hole

has no grommet, and is just exposed... just the foam.

Is everyone else's Jeep this way?

Here's this hole I am referring to:

View from under the hood
Image
View from inside the Jeep
Image

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK
Top
 Profile  
 
DirtyKK
 Post subject: Re: Um, is this normal? Should there be a plug here?
PostPosted: Sun Oct 10, 2010 8:33 pm 
Offline
LOST Addict
User avatar

Joined: Thu Oct 29, 2009 5:59 pm
Posts: 2127
Location: Navarre FL
i have wiring running through that hole. on mine, there is a rubber grommet. maybe jeep cheaped out and didnt put one there or maybe it was just forgotten. go look at some new ones on the lot to see if they have em or go tell them your junk is missing.
Top
 Profile  
 
Diggerfreek
 Post subject: Re: Um, is this normal? Should there be a plug here?
PostPosted: Sun Oct 10, 2010 11:58 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
Hmmmmmmmmmmm :?

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image
Top
 Profile  
 
Marlon_JBT
 Post subject: Re: Um, is this normal? Should there be a plug here?
PostPosted: Mon Oct 11, 2010 9:31 am 
Offline
LOST Addict

Joined: Sat Sep 17, 2005 9:56 am
Posts: 1773
Location: Detroit or Ypsilanti, MI
I'm not near my dealership but I will stop by one that I hate with a passion (screwed me over oh, twice, I'm not letting them touch this Jeep) to see if there's a plug there on a 2010.

hmm.... really interesting.

And Hi Digger. :)

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK
Top
 Profile  
 
Diggerfreek
 Post subject: Re: Um, is this normal? Should there be a plug here?
PostPosted: Mon Oct 11, 2010 10:16 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
What up buddy :P

When did ya get a KK?


Any way, that hole was used for the master cylinder on manual equipped KK's......

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image
Top
 Profile  
 
lefty's pride
 Post subject: Re: Um, is this normal? Should there be a plug here?
PostPosted: Tue Oct 12, 2010 12:11 am 
Offline
LOST Newbie
User avatar

Joined: Sun Aug 29, 2010 3:58 pm
Posts: 71
Location: langley, bc
Diggerfreek wrote:
Any way, that hole was used for the master cylinder on manual equipped KK's......

that it is there is a master there on mine
Top
 Profile  
 
Marlon_JBT
 Post subject: Re: Um, is this normal? Should there be a plug here?
PostPosted: Tue Oct 12, 2010 2:00 am 
Offline
LOST Addict

Joined: Sat Sep 17, 2005 9:56 am
Posts: 1773
Location: Detroit or Ypsilanti, MI
Diggerfreek wrote:
What up buddy :P

When did ya get a KK?


Any way, that hole was used for the master cylinder on manual equipped KK's......

Got it on October 6th. :D Brand new, 7 miles on it. Now I have 504 on it. :D

This one is gonna be a LOT of fun. So happy to be back in a Liberty, you just do not understand. This reminds me a LOT of my '04, and I LOVED my '04 but I had to dump it due to really bad memories.

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KK Discussion---2008-2012 Liberty/Cherokee Models

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management