I did this a while ago to try and find a rattle in my dashboard. NOTE: This is just for reference and i WILL NOT be held responsible for ANYTHING that might happen if you attempt this. If you’re going to, disconnected the battery and let it sit for at least 15 minutes to discharge the system.
First off comes the top cover above airbag using one of those plastic pry tools




Then the middle



Then these two screws





Then this screw


Then the front peels down


The the screws holding on the OH Sh*t Bar


Airbag almost out


Airbag out


Airbag itself
BackView


SideView


Connection for side of bag


Im sure i forgot some step since i did this a while ago

_________________
2008 KK Liberty
Inferno Red
Daystar 2" Spacer Lift With SkyJacker Hydro Shocks
JBA Gen 5.5 Upper Control Arms
Rokmen Riddler 8.25 Differential Cover
2 KC Slimlite 100 Watt Driving Lights on JK Light Bar
245/75/16 All Terrains
Mopar Front Tow Hooks
Mopar Rear Tow Hook
Mopar Skids