I took a real grenade that was emptied and made it into my new shift knob! first figured out how to get the boot and old knob off. Then how to get the boot off the knob. then drilled the frag grenade.. secured it.. took off the top and trimmed the inside so it could go down where it needed to be. then fixed everything (top flipper and carter pin/ring) so that it wont rattle. Now it is tight, silent, and the perfect weight not bad for something i got at a gun show for $5!

_________________
2006 Renegade. Completely stock.

Looks good
was hoping you'd post a pic of it up on here
good job!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

thanks! i have a good system down now for making them.. i'd hook you up with one if A. your jeep wasnt the wrong color. and B. it wasnt a *gasp* automatic!

_________________
2006 Renegade. Completely stock.

Cool Beans!

_________________
===
New KJ Gear - Desert Armor Flak

2004 Renegade Light Khaki - 4" JBA Lift - Rock Lizard Products: Komodo Dragon Rear Bumper, Prototype Winch-mount Front Bumper, Super Skink Sliders - All J's Super Tranny Skid II - 31" Firestone Destination AT's on Moab wheels - Cobra 75W CB w/ stock Antenna mod

[b]Retired, US Military

Dude, that is freakin awesome. With I could figure out a way todo that with my auto. Stupid shift knob.

_________________
I'm right 97% of the time. Who cares about the other 4%.

What if the Hokey Pokey is what it's all about?

2005 Jeep Liberty Limited - Bright Silver Metallic

I wanna see the look on the cops face if you get pulled over!

_________________
Mall Crawler since 1/10/09.
02 Renegade(Cactus green)-Dayton Timberline ATII's-KC fogs-LED tailgate light-K&N air filter-Boiler 3/8" shim/clevis on front, 2 extra isolators in back!
No locks, no rock, just parking blocks.

http://www.showmejeepclub.org member

Thats awsome

_________________
3.5in RK lift
245/75/16 firestone destination MT
16in cragar soft 8s
black horse grill guard
2 hella 500s

hahaha.. hopefully that doesnt happen!! i'll prob. get a fine for every 'fog light' above legal height (6 of them) and bumpers above legal height, and tinted windows... and probably a grenade for a shift knob! the cob would looooove me! hahaha

_________________
2006 Renegade. Completely stock.

Wow so manual vehicles still exist!

Looking good! If My KJ was a manual that would probably be on my list of mods.

_________________
Fran:2002 Jeep Grand Cherokee Limited 4.7 quadra drive. 31in General Grabber AT2, OME HD, bilstein, IRO sway links, addco rear sway. Kolak 3in cat back flowmaster SUV 50, magnaflow 3in cat, airaid JR kit, ram air, P.I.E. aux adapter, surco 45x50, husky liners.http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=65276&p=719908#p719908

I too have a 6 speed. Any suggestions on what would make a good shift nob for me?

(Leaving myself wiiiiiiddddeee open here)

_________________
'05 Renny 6 speed
OME/Bilsteins, Spidertrax Wheel Spacers, Husky Liners all around, Gutter Guarded Grill, 1 ISO each side rear, Boilers top shims front. And a whole list of things yet to do.

What are your interests. From that pick something cool/ unique. Imagination is the only limit. Things I have thought about if I was to get a stick shift.
Guitar neck
Gun frame
Mortar shell
Cane handle
Wooden pistol grip
2 way radio mic
Hockey stick
Hockey puck
Bronzed baby shoe
Motorcycle grip/ parts

Just some ideas


Sent from my DROIDX using Tapatalk

_________________
IceColeNH #JC060619
03' Renegade
Al's Arms.
3 inch lift; Rusty's springs all around, Rancho struts + 4 electrical conduit washers up front. Old Man Emu in rear.
Moog K3199 in the lowers
General Grabber AT2 - 245 75 16 "load E on a mawl crawler? You don't need those." tire dealer.
K&N Filter
Silverstar Ultras

i cant find the post but a year or two agr a guy took a flight stick and mounted it to the shifter and it looked cool

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.

Beer taps handles work great as well
or used to on some of my older cars,
or what they call "rat rods" now

have a few laying around that would still work

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

we shall not use the name rat rod!!!! All hot rods are created equal!!!

_________________
Apatosaurus, Jurassic Park Edition