KK Stereo Removal Step by Step

nickEmangione · **Joined:** Fri Feb 26, 2010 12:51 pm **Posts:** 40

heres a step by step on how to remove the factory stereo and install an aftermarket one.....thought it was a well put together video and even though the process is straight forward ive been waiting for a step by step before installing my own double din.....enjoy :JEEPIN:

http://www.youtube.com/watch?v=3vhuXc1r9so&feature=related

SD-KJ · **Posted:** Tue Dec 21, 2010 12:40 pm

Interesting.. this answers some of my questions about that center console. My silver bezel rattles like a sun of a gun and i'm looking for a way to pad it or something...

nickEmangione · **Joined:** Fri Feb 26, 2010 12:51 pm **Posts:** 40

SD-KJ wrote:

Interesting.. this answers some of my questions about that center console. My silver bezel rattles like a sun of a gun and i'm looking for a way to pad it or something...

Mine rattles so bad sometimes I'll drive to work while holding it with my hand lol!

After Christmas Im gonna install a new double din and I will do a full detailed write up on the entire process including wiring up the correct PAC harness because the newer Jeeps have a computerized turn on with no accessory power at the head unit.

Jeepin_it_real · **Posted:** Wed Dec 22, 2010 3:15 am

the padding inside generally falls off... to fix squeaks and rattles add more insulation.... also it helps to wire tire and organize wires behind the radio anything extra will rattle. other things that you may want to consider that are important are the clips attached to the bezel they sometime get stuck in the face... you should remove them and reattach to the bezel as u dont want to push them in and lose them... i've pulled off the face about 100 times, and that's not an exaggeration... going to pull it out again soon too, gotta mod/fix a few things.

SD-KJ · **Posted:** Wed Dec 22, 2010 10:21 pm

nickEmangione wrote:

SD-KJ wrote:

Interesting.. this answers some of my questions about that center console. My silver bezel rattles like a sun of a gun and i'm looking for a way to pad it or something...

Mine rattles so bad sometimes I'll drive to work while holding it with my hand lol!

After Christmas Im gonna install a new double din and I will do a full detailed write up on the entire process including wiring up the correct PAC harness because the newer Jeeps have a computerized turn on with no accessory power at the head unit.

haha, yep. i just turn the radio up!

SD-KJ · **Posted:** Wed Dec 22, 2010 10:21 pm

Jeepin_it_real wrote:

the padding inside generally falls off... to fix squeaks and rattles add more insulation.... also it helps to wire tire and organize wires behind the radio anything extra will rattle. other things that you may want to consider that are important are the clips attached to the bezel they sometime get stuck in the face... you should remove them and reattach to the bezel as u dont want to push them in and lose them... i've pulled off the face about 100 times, and that's not an exaggeration... going to pull it out again soon too, gotta mod/fix a few things.

Yeah, i need to pull it off and put some more padding in. Where do you get something like that?

Jeepin_it_real · **Posted:** Wed Dec 22, 2010 10:46 pm

Homedepot or lowes....

SD-KJ · **Posted:** Wed Dec 22, 2010 11:08 pm

Jeepin_it_real wrote:

Homedepot or lowes....

ok.. just like stick-on weather sealing or what?

KK Stereo Removal Step by Step

Who is online