Front
ome 927 springs (adding a fabed bumper)
Bilstien BE5-D916-H0 strut
1/4 inch jba strut spacer
3/8 clevice spacer
terreaflex bump stop

Rear
Rustys springs (Already have them or would go ome but will go to ome once they sag)
Bilstiens not shure on part #
2 upper isolaters per side
2 hockey puck bump stops

What are your thoughts on this set? will the back sit as high as the front? Any changes other than not using the rustys springs in the rear? I plan on running 31 10.50 r15 tires on 15x7 soft8 for trail tires.

_________________
2006 Liberty sport
No mods yet but coming soon

More than likely front will be higher of course depending on how much your front fabbed bumper weighs
front has shocks
rear Bilsteins F4-BE5-6458-H7s work well

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

What can I do to get a little more out of the rear?

_________________
2006 Liberty sport
No mods yet but coming soon