The Patient - Pre Op

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Don't forget Chris's goat :jester:

Pote · **Posted:** Fri Mar 18, 2011 12:32 am

I should be there by 9:30 -ish boys...goat tied to the hood. :ROTFL:

tommudd · **Posted:** Fri Mar 18, 2011 2:27 am

Sounds good, we have to have it done and to the alignment shop by 1 PM so that should work :JEEPIN:

CoopaTroopa · **Posted:** Fri Mar 18, 2011 6:15 pm

Its 6:14 and I havent seen any pics yet! is it alive? :frankie:

tommudd · **Posted:** Fri Mar 18, 2011 9:05 pm

He just left for the 2 hour ride home at 8:00 PM, got done, stood around and talked....shop for a while you know. :wink:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Tapper ran dry, was time for me to go home :ROTFL:

tommudd · **Posted:** Fri Mar 18, 2011 10:44 pm

CoopaTroopa · **Posted:** Fri Mar 18, 2011 11:11 pm

Wait... I will look like that??? SWEET :BANANA:

tommudd · **Posted:** Fri Mar 18, 2011 11:15 pm

Did a JBA top pate ( 1/4 inch) small clevis and one extra top iso in the rear along with 927/948 combo
when he left it was sitting at 22 inches all around. I think he was like 18 when he rolled in :ROTFL:

CoopaTroopa · **Posted:** Fri Mar 18, 2011 11:18 pm

now when you say small do you mean like one conduit nut or are you just downplaying the role of the clevis? :mrgreen:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

CoopaTroopa wrote:

:shock: Wait... I will look like that??? SWEET :BANANA:

Only with as good of a looking crew, minus the photographer, if ya get done at the original Mudd shop! :jester:

CoopaTroopa · **Posted:** Fri Mar 18, 2011 11:22 pm

I might just have to make the drive out then :-)r

tommudd · **Posted:** Fri Mar 18, 2011 11:25 pm

CoopaTroopa wrote:

now when you say small do you mean like one conduit nut or are you just downplaying the role of the clevis? :mrgreen:

Since he had one upper iso per side for the rear "from experience" I knew how much "clevis" to give him along with a 1/4 inch top plate
If he would of had a 3/8 inch thick top plate then we would of not done a clevis at all.
But we did a little over 1/8 of an inch per side.
If he would of had 2 iso's per side and 1/4 inch plate I would of done 3/8 inches of clevis
knowledge can be a valuable tool or a PITA!!! :ROTFL:

CoopaTroopa · **Posted:** Fri Mar 18, 2011 11:28 pm

ahhh I see... man now I wish I could have ordered everything at once! But I may have a surprise waiting for me soon :BANANA:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

CoopaTroopa wrote:

I might just have to make the drive out then :-)r

Don't ya know by now get Muddififed is the only way to go!?!?!?!?! :JEEPIN:

SHEEEEEEEEEEESH, send em to school and the only thing they want to do is the.............
:ROTFL:

tommudd · **Posted:** Sat Mar 19, 2011 12:21 pm

well since we've heard nothing we can only assume that :
1) he got LOST on the way home last night :shock:

2) he's enjoying the lift so much that he's still sitting in the driveway looking at it

3) he's got the hard part done now and doesn't need us anymore

4) so many women were chasing him down the road due to BA looking KJ that he can't stop anywhere
5) :5SHOTS:

after putting up with us yesterday thats all he can do
The more I think about it the more I wish we would of went back to Sears regarding the loose lug nuts. Something isn't/wasn't right there. :banghead:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

tommudd wrote:

The more I think about it the more I wish we would of went back to Sears regarding the loose lug nuts. Something isn't/wasn't right there. :banghead:

03CDKJ · **Posted:** Sat Mar 19, 2011 2:57 pm

No more Cleveland lifts for me...... Too much rust! :grim:

CoopaTroopa · **Posted:** Sat Mar 19, 2011 2:59 pm

kinda off topic... but 03 are your lights mounted to the stinger or to the bumper?

03CDKJ · **Posted:** Sat Mar 19, 2011 3:10 pm

CoopaTroopa wrote:

kinda off topic... but 03 are your lights mounted to the stinger or to the bumper?

Stinger

The Patient - Pre Op

Who is online