Sorry for the wait guys! but its taken me some time to get there with my camera at night. and i just put in the rear ones. so here it is!
Materials:
I bought 2 sets of blue LED bars at wallmart in the auto section. 20$ each
i also purchased 2x 3 socket 12v adapters that has a USB port on the side
one of them was metal plated withmatching blue LEDs i had bought after id already bought the one.
the normal adapter was 12.99 and the blue one from wall mart was 15$
electrical tape
velcro
3M tape (PROVIDED)
i first used 3x 1'' strips of velcro to secure the 12v adapters to the sides of the console. then used electrical tape to hold the wiring together and to hide it.
then using the provided 3M tape i secured the first set to under the console and put the button in the adapter.
i held the wires tight across the console from left to right i had a friend hold it down flush while i secured it to the other side with a piece of electrical tape

these are the 12v adapter and the deodorizer on...
and heres it with the front lights on...


then very carefully i threaded the wires along the console underneath the plastic and then using the 3m tape attached it
Back lights on!

view from the back seat
So tell me: what do you think!?


_________________
2010 "Jeanie" Liberty KK 4x4 Sport Brilliant Black
25k miles,
Remote start,
Weather Tech liners,
4x 12v ports and 2 USB ports
Droid 2 Global Mount for GPS and Media Center
Wrangler STrubber.
http://www.flickr.com/photos/cohencapture/