Frankenlift for the Renegade

liquidxit2 · **Posted:** Wed Jul 06, 2011 10:46 am

tommudd wrote:

Back in 05 when I did the first lift on mine, I installed it on a Friday morning, aligned Friday afternoon and headed for Orlando Saturday morning.
No problems at all
if done right :wink:

Agreed. I have driven quite a few trips on my lift to the tune of 4k + miles and its been nothing but a dream to drive. Im just kicking myself for not selling the talon and lifting the jeep sooner.

tommudd · **Posted:** Wed Jul 06, 2011 10:48 am

Megalos wrote:

glider wrote:

That 1" tire height change from 245/75/16 to 235/85/16 is magical. Things are perfect at 31" and the jeep is practically junk at 32" :mrgreen:

Unless you have a 6spd...which makes the 32's frickin great!

But it would be even better with 4.10s :wink:

think about it! :ROTFL:

Power to spare

blackwidowkj06 · **Posted:** Wed Jul 06, 2011 10:07 pm

Hey brettacuff, let me know how it works out for you. I'm going to redo my lift set-up this year. I wanted to piece together my own Frankenlift, but ordering all those individual parts; it might take awhile to get to me. Is AllJs customer service good? How long did it take for your Frankenlift to get to you?

STINGN · **Posted:** Wed Jul 06, 2011 10:31 pm

blackwidowkj06 wrote:

Hey brettacuff, let me know how it works out for you. I'm going to redo my lift set-up this year. I wanted to piece together my own Frankenlift, but ordering all those individual parts; it might take awhile to get to me. Is AllJs customer service good? How long did it take for your Frankenlift to get to you?

All J's is gangsta (as JL rockies would say, this should bump his ego

)

blackwidowkj06 · **Posted:** Wed Jul 06, 2011 10:36 pm

STINGN wrote:

blackwidowkj06 wrote:

Hey brettacuff, let me know how it works out for you. I'm going to redo my lift set-up this year. I wanted to piece together my own Frankenlift, but ordering all those individual parts; it might take awhile to get to me. Is AllJs customer service good? How long did it take for your Frankenlift to get to you?

All J's is gangsta (as JL rockies would say, this should bump his ego

)

Well that doesn't tell me much at all

tommudd · **Posted:** Wed Jul 06, 2011 11:05 pm

AllJs is great to deal with
Heather is one in a million as far as customer service and knowing her product line

as far as being gangsta
don't think thats a proper term to call them

blackwidowkj06 · **Posted:** Wed Jul 06, 2011 11:45 pm

tommudd wrote:

AllJs is great to deal with
Heather is one in a million as far as customer service and knowing her product line

Thanks Tom. I like the idea of the front lift being pre-assembled. In a way, makes things abit easier. Can they order and send the JBA UCA's with the Frankenlift; or do I order them myself? Can anyone tell me how long it took to get your Frankenlift from the day you ordered to the day it showed up at your front door? When I order mine, I'll be in a crunch for time!

tommudd wrote:

as far as being gangsta
don't think thats a proper term to call them

X2
I wanted some proper information.

tommudd · **Posted:** Thu Jul 07, 2011 12:15 am

Most times they seem to have a few sets made up and ready to ship, at one time a good while back they were running slow but most times not long.
Super easy to install a Frankenlift.

blackwidowkj06 · **Posted:** Thu Jul 07, 2011 12:18 am

tommudd wrote:

Most times they seem to have a few sets made up and ready to ship, at one time a good while back they were running slow but most times not long.
Super easy to install a Frankenlift.

Thanks for all the good info. This Frankenlift might be the way to go since I'll be in a crunch for time. Do you know anything about the JBA's, can AllJ's supply them?

brettacuff · **Posted:** Sun Jul 10, 2011 11:42 pm

All J Products is in California and they ship via UPS. It took 7 days to get to me due to a holiday & a weekend. Depends on where you are locate. They built mine the day after I called and there customer service is great.

1 BAD BIRD · **Joined:** Mon Jun 20, 2011 9:15 pm **Posts:** 22

All J can supply the JBA A arms. 395.95 + s/h

Bob s

blackwidowkj06 · **Posted:** Mon Jul 11, 2011 3:11 pm

brettacuff wrote:

All J Products is in California and they ship via UPS. It took 7 days to get to me due to a holiday & a weekend. Depends on where you are locate. They built mine the day after I called and there customer service is great.

I'm in Somerset, KY. Not too far from you brettacuff.
Would you be up for a M&G down here sometime? :juggle:

Did anyone do a clevis lift with the frankenlift?
Btw, thanks for the information.

blackwidowkj06 · **Posted:** Mon Jul 11, 2011 3:12 pm

1 BAD BIRD wrote:

All J can supply the JBA A arms. 395.95 + s/h

Bob s

SWEET!!!

I'm going to probably have my wisdom teeth cut out in December, so after I know how much my co-pay will be on the surgery; I should know how much I can throw into the Liberty. :mrgreen:

tommudd · **Posted:** Mon Jul 11, 2011 4:22 pm

JeepinByAl is in Pa so closer shipping than Cali for you in Ky.
No use having them shipped across the country only to ship them back again :wink:

When you first install the Frankenlift you are pretty much maxed out height wise, maybe after 30-40,000 miles you can then do a clevis to regain some

blackwidowkj06 · **Posted:** Mon Jul 11, 2011 7:06 pm

tommudd wrote:

JeepinByAl is in Pa so closer shipping than Cali for you in Ky.
No use having them shipped across the country only to ship them back again :wink:

When you first install the Frankenlift you are pretty much maxed out height wise, maybe after 30-40,000 miles you can then do a clevis to regain some

Ah, okay. Wasn't sure where JBA was.
Well, I didn't know the Frankenlift maxes someone out on lift for the Liberty. Thought you could do more. Can I add upper rear isos in the back?

Ryn7 · **Posted:** Mon Jul 11, 2011 8:27 pm

We are very happy with our Frankenlift.
It rides great, performs excellent and looks good to boot!
I just wish I would have opted for the OME 790 Diesel coil springs is all!

Frankenlift for the Renegade

Who is online