Hello everyone, I am trying to wire up an EVIC to my liberty and have followed the guide here
http://www.jeepkj.com/evic/and it is all fine and dandy put does not mention anything about wiring up the sunroof controls.
The sunroof wiring harness on my jeep is rectangular and has 4 pins on it, one for each corner of the rectangle. They are labeled ABCD and the harness says Delphi and in very small letters what looks like PA66.
Wire A: Orange / Grey
Wire B: Orange / Yellow
Wire C: Orange
Wire D: Orange / Grey
The EVIC I got is from a 2001 or so Concord, 56042749AC. The connector for the sunroof controls on it is flat, all the pins are in 1 row. There is no labeling on it. The wires are from left to right... 1:Dark Blue or Purple (color blind here...) 2: Black 3:Light Blue 4: White
I have searched high and low for information on this but came up dry, anyone have some experience/knowledge on this, or know where I can find out the pinouts for both?
Also, I am having a bit of trouble figuring out where to hook up the fused ignition cable so it will turn off when my Jeep is off. My cig lighter stays on when the car is off. I have a Pioneer 3300BT head unit installed, could I splice into there?