It is currently Wed Nov 04, 2026 4:58 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: U-joints, which to choose???
PostPosted: Mon Nov 07, 2011 9:50 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Nov 03, 2009 3:34 pm
Posts: 248
Location: Pontiac, Qc. (Canada)
Since lifting the Libby, I noticed a slight vibration from rear train when applying throttle from complete stop, lasts about 2-3 sec then it's gone. I suspect the u-joint to be put under more stress caused by differential standing lower. Besides, should be a good idea to replace them, as part of regular maintenance.

My problem now stands with ordering them... Rockauto offers a wide choice, but I am a bit mesmerized by the part description, where it mentions: "Exc. Man. Shift-On-The-Fly Transfer Case"

http://www.rockauto.com/catalog/raframecatalog.php?carcode=1432225

Aren't all KJ equipped with manual shift-on-the-fly transfer case? Why the exception, then? Does not make any sense :dizzy:

_________________
RIP 10/31/2012
Green Metallic 2006 CRD Limited
GDE Hot tune ~ Pre-F37 TCM ~ Transgo shift kit ~ MagnaFlow ~ Homemade Provent ~ OME 2" lift & Airlift ~ Samco ~ Euro TC ~ Lift pump ~ Nylon fan blade & Hayden clutch ~ Etc!


Top
 Profile  
 
 Post subject: Re: U-joints, which to choose???
PostPosted: Mon Nov 07, 2011 6:37 pm 
Offline
LOST Member

Joined: Sat Jan 01, 2011 2:52 pm
Posts: 134
Hey hey you again,i changed mine 1 month ago,since the !%!$ dealership change only one and it broke right away because of the other one seized up,so i went with
precision super strenght greasable number 280,two of them,21$ each,you grease them every 5000km,you will never have any problems.

If you want non-greasable you can go with super strenght number 269.

For sure some here will say go with the spicer ones,you can get them for around 30$ each,but my precision ones are more than enough,and they handle our torque easily. :D

By the way both u-joint are the same on our crd,so dont worry,i did so many checks about that,the numbers i gave you are the good ones, i measured them,and even talked to the fed mogul guy :wink:

Your local parts store should carry them,they are from federal mogul,and one advice,CHANGE BOTH!!! :lol:


Top
 Profile  
 
 Post subject: Re: U-joints, which to choose???
PostPosted: Tue Nov 08, 2011 10:42 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Nov 03, 2009 3:34 pm
Posts: 248
Location: Pontiac, Qc. (Canada)
Stealership :furious: Would not trust them any farther than where I could throw them...

BTW, thx for the numbers. I did call Fed Mogul and the tech was quite surprised about my query, actually mentioned this was the first time someone called him with this question (shift-on-the-fly thing). He was only able to tell me the recommended part # (all 369 or 369/354 combo)...

Since you've had first-hand experience with this, I'll follow your advice... Thx again! :wink:

_________________
RIP 10/31/2012
Green Metallic 2006 CRD Limited
GDE Hot tune ~ Pre-F37 TCM ~ Transgo shift kit ~ MagnaFlow ~ Homemade Provent ~ OME 2" lift & Airlift ~ Samco ~ Euro TC ~ Lift pump ~ Nylon fan blade & Hayden clutch ~ Etc!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com