It is currently Mon Nov 09, 2026 5:41 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 4:38 am 
Offline
LOST Newbie

Joined: Thu Jul 14, 2011 9:06 am
Posts: 32
Currently running 235/70/16's - Rene rims.

I want a little extra width and hight for sand and offroading.

I can get a very good deal on 5 of these
Image

problem is that they are 15x8 - Ideally i would have liked 15x7

What do you guys think? I am scared that the tyres will klimb off the rims if I go 15x8.
Looking at this site
http://www.bridgestone.co.za/products/4 ... eler_d694_
most of the rim measure in inch is less than 8.00 unless I go quite a bit bigger in tyre size but then I will def. need a lift.

Should I go 16x7 rather or just stick with my normal Renegade rims and just go 245/70/16 or maybe even 245/75/16?
Anyone on the site running a KJ with 245/75/16's without lift so i can see what it looks like?
Will 265/75/R15 fit on a stock KJ?

Lots of Q's but i'm kind confused as to what will work and what not.
I love the look of that soft 8's and if it will work well with a good tyre without having to lift then I would probably go for it but if the 245/75/16 will work beter I can just leave my rims and get the tyres.


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 5:24 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 20, 2011 9:39 pm
Posts: 67
Location: Jonesboro, AR
Idealy, you want to stick to a !5x7 or 16x7 with 4"BS for a soft 8. The 8" wide rim will cause more rubbing in most cases.

A 245/75/16 will fit without a lift but you will rub on pinch weld and inner fenders during turns and flexing, in other words you can run em but much better witth a lift.

As far as 265/75/16, I would not attempt this without a lift, even with a 2.5-3.5in lift the 265/75 a gear change for the front and rear diffs to a 4:10 are recommended. With out changing the gears you libby with become sluggish at best.

I feel the info I am giving here to be accurate, please correct me if I am wrong.

When in dobt ask tommudd! 8)

_________________
2002 Jeep Liberty Limited aka "The Repo"
Support your local Repo Man-Miss two payments


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 6:26 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Hi Havoc,

I did run for a while 245/75R16 without a lift. Now yes they fit, you will get some rubbing in the front pinchweld, but the biggest problem I had was at the back where the tyres scarped against the back when flexing the rear axel and caused some damage. You can resolve this by adding some bumpstops at the bottom 1 or 2 inc. Best if you decide to fit bigger tyres is to fit a Lift. Otherwise just go for 245/70R16 they fit well.

Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 6:41 am 
Offline
LOST Newbie

Joined: Thu Jul 14, 2011 9:06 am
Posts: 32
Thanks guys.

yeah i also got informed that the 15" have issues fitting over the brakes.

So i'll stick to the 16"s and 246/70/16 or get a 1.5/2" lift and go for the 245/75/16's. Thinking of doing a spacer/spring lift maybe.

I just now need to decide if I want the Soft8 rim in 16x7 or should I just keep my current Renegade rims. I suppose there will be no real difference accept estetics. The Soft8 rims do look more rugged and can take a beating, but the Stock Renegade rims are lighter.


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 9:29 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
For less issues stick with the stock wheels and 245-70-16s, 245-75s may work but only if you don't go over any curbs, speed bumps and drive straight down the road. Not knowing for sure what year you have/mileage etc thats the best answer.
As far as a spacer lift may as well take your money and throw it down a rat hole. Unless its a brand new KJ thats never been driven with zero miles, suspension has already started to sag and not worth it in the long run.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 6:27 pm 
Offline
LOST Newbie

Joined: Thu Jul 14, 2011 9:06 am
Posts: 32
Thanks for the advise guys.
Will be skipping the 15''s


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 9:23 pm 
Offline
LOST Junkie
User avatar

Joined: Tue Oct 19, 2010 9:14 pm
Posts: 587
Location: Trenton, MO
Yeah deff, I'd stay with 16s. I like the handling better. If I end up running 33s I'll do it with a 17" wheel.

_________________
2005 Jeep Liberty.....SOLD =(

1995 Jeep Wrangler YJ





http://www.cardomain.com/ride/3897619/2005-jeep-liberty-sport-sport-utility-4d


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 11:26 pm 
Offline
LOST Member

Joined: Wed Dec 22, 2010 12:18 am
Posts: 373
Location: Lake County, Illinois
ProComp makes a 16 inch with 4.5 inch backspacing that
looks allot like the Soft 8.

I have the version with the simulated bead lock on my KJ.

Image

_________________
Brad
International Man of Mystery, Singer of Sentimental Ballads,
Soldier of Fortune, Guardian of the Holy Hand Grenade of Antioch,
Bass Player Extraordinaire, Keeper of the Eternal Flame
of the Immortals, Master Swordsman, The "5th" Beatle,
Expert Marksman, Stand-up Comedian, Martial Artist,
Jeep owner, and all around swell guy.


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 11:31 pm 
Offline
LOST Addict

Joined: Mon Sep 04, 2006 10:12 pm
Posts: 2476
Location: Jamestown PA
15in wheels are cheaper.. and 15in tires are cheaper. if you NEED tires i'd buy some cheap wheels and put 15in tires of 15in wheels... because it will be cheaper to replace the tires in the future and you want wheels anyway.

i just bought 15x7 soft 8 rip off wheels that were summit brand from summitracing.com. they have 3.75 backspacing and were $44 a piece.

i put 31x10.5 15's on.. and they do look very nice on my jeep and you wouldnt need a crazy lift to clear them. Just trim a little and pound the pinch welds.

as far a brakes... 15in steel wheels (soft 8 or D windows) will fit. 15in alum. wheels will not fit.

for pics look at my posting in the tire/wheel section

viewtopic.php?f=8&t=64586

_________________
2006 Renegade. Completely stock.


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 11:42 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
KJ_WHEELER_2010 wrote:
Yeah deff, I'd stay with 16s. I like the handling better. If I end up running 33s I'll do it with a 17" wheel.

Nothing wrong with 15s.Sad part is my 35" tires are cheaper then some of your guy's stock sized tires in 16" and 17" rim sizes.Sucky thing is the rims I want will force me to 17" rims on the next set of tires so I'm stepping up to 37" tires to retain 10" of sidewall.Good way to spend $4500 on just rims and tires :banghead: ,when my current 35" tires and 15" alloy rims cost less then $1500.


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Wed Jan 11, 2012 11:48 pm 
Offline
LOST Addict

Joined: Mon Sep 04, 2006 10:12 pm
Posts: 2476
Location: Jamestown PA
tjkj2002 wrote:
KJ_WHEELER_2010 wrote:
Yeah deff, I'd stay with 16s. I like the handling better. If I end up running 33s I'll do it with a 17" wheel.

Nothing wrong with 15s.Sad part is my 35" tires are cheaper then some of your guy's stock sized tires in 16" and 17" rim sizes.Sucky thing is the rims I want will force me to 17" rims on the next set of tires so I'm stepping up to 37" tires to retain 10" of sidewall.Good way to spend $4500 on just rims and tires :banghead: ,when my current 35" tires and 15" alloy rims cost less then $1500.



i hear that. I just bought 4 15x7 3.75BS steel wheels and 4 31x10.5 15 studded goodyear duratracs.. everything shipped for under $900 brand new.

15's for the win 8)

_________________
2006 Renegade. Completely stock.


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Fri Jan 13, 2012 3:09 am 
Offline
LOST Newbie

Joined: Thu Jul 14, 2011 9:06 am
Posts: 32
2006 KJ - Loving the look of those wheels on yours man and the bullbar.

Thing is if those 15's where 15x7's i would have gone for it, 15x8's not so sure.
maybe it's better to stick with the stock wheels and use the money that was going to be used for the rims for a proper lift rather than doing a spacer and coil lift?
I'll have a look and see what the prices for the 15x7's are. The 15x8's was a very good pricefor 5 as i can get it used, but in great condition.
The 15x7's will be new so at least double the price.

So you say that the Steel 15 ones will fit over the brakes then?


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Fri Jan 13, 2012 3:49 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Havok wrote:
So you say that the Steel 15 ones will fit over the brakes then?


Hi
15 will fit depending on the offset, you need a lot of offset to clear the brakes otherwise they won't fit.

Your stock rims are pritty strong, personally I use the orinianal alloy one my KJ came with, but have 2 set one with AT and one with MT and I haven't had any problems.

Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Fri Jan 13, 2012 4:51 am 
Offline
LOST Newbie

Joined: Thu Jul 14, 2011 9:06 am
Posts: 32
Pippobug wrote:
Havok wrote:
So you say that the Steel 15 ones will fit over the brakes then?


Hi
15 will fit depending on the offset, you need a lot of offset to clear the brakes otherwise they won't fit.

Your stock rims are pritty strong, personally I use the orinianal alloy one my KJ came with, but have 2 set one with AT and one with MT and I haven't had any problems.

Fil.


Thanks Pippobug.

yeah i think i am going to stick with the stock rims rather. Then use the bucks i save on a lift rather and 245/70/16's or 245/75/16's depending on which lift i get.

Thinking OME, Ironman or EFS. Still doing my homework on each but so far i'm leaning towards EFS. Absolutely awesome warrantee and i know they are very strong - 100 000KM's


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Fri Jan 13, 2012 6:58 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Havoc

I fitted OME all round to my KJ and I am very happy with it. There are a lot of post on here about lifts. Just remember the higher you go you will need to change the UCA otherwise you will have problems.

Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Fri Jan 13, 2012 10:32 am 
Offline
LOST Addict
User avatar

Joined: Mon Apr 17, 2006 10:16 pm
Posts: 1391
Location: Felton, DE
Havok wrote:
2006 KJ - Loving the look of those wheels on yours man and the bullbar.

Thing is if those 15's where 15x7's i would have gone for it, 15x8's not so sure.
maybe it's better to stick with the stock wheels and use the money that was going to be used for the rims for a proper lift rather than doing a spacer and coil lift?
I'll have a look and see what the prices for the 15x7's are. The 15x8's was a very good pricefor 5 as i can get it used, but in great condition.
The 15x7's will be new so at least double the price.

So you say that the Steel 15 ones will fit over the brakes then?


I run 15x8 soft 8 and they are fine. The only reason why I would run 15x7 at this point is for a little bit of weight reduction.

_________________
06 White KJ Sport 4x4 :JEEPIN:
http://www.cardomain.com/ride/2432458/1


Top
 Profile  
 
 Post subject: Re: Going from 16" stock to 15" Soft 8's
PostPosted: Fri Feb 24, 2012 12:06 pm 
Offline
LOST Newbie
User avatar

Joined: Tue Mar 24, 2009 12:39 pm
Posts: 66
Location: san diego, ca
about to buy the black rock soft 8 equivelent in a 16x7. should i go with the 4 in back space or the 4.5 inch back space.

_________________
2006 liberty 65th edition
Sylvania Silver Star Ultra II headlights
K&N FIPKII intake
Sony headunit with I-pod hookup
OME/Rancho lift
Kumho Road Venture AT's 245/75 16's
OEM front skid
Jet Chip stage 1
on the list:
custom exhaust
the rest of the skids
roof rack
lights
and the list goes on


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com