It is currently Sun Nov 01, 2026 3:16 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: dumb question
PostPosted: Tue Jan 17, 2012 11:31 am 
Offline
LOST Member
User avatar

Joined: Sun Nov 20, 2011 3:31 pm
Posts: 104
Location: Utah
Hey im new to this, and im sure this is a dumb question, but what all do I need to do to be able to put 32 inch or 33 inch tires on my 04 liberty? Or what would you recommend I go with? And I have done some searching and haven't found much. Sorry if this is at all an inconvenience.


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Tue Jan 17, 2012 11:57 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
search more
Tons of info on lifts and what fits what doesn't
But for 32s
need a good full spring lift in the 3.5 to 4 inch range
then regear to 4.10s
then you can get tires
For 33s more lift, 6 inch from jeepinbyal, would also do a steel front diff from him as well with 4.56 gears

How deep are your pockets?
Most go with a good OME full spring lift and 245-75-16s , can run stock gearing
lift is 750/800 and you're good to go

Of course some will come on and say just hack away the fenders etc but it depends on how you want the finished product to be

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Tue Jan 17, 2012 6:09 pm 
Offline
LOST Member
User avatar

Joined: Sun Nov 20, 2011 3:31 pm
Posts: 104
Location: Utah
tommudd wrote:
search more
Tons of info on lifts and what fits what doesn't
But for 32s
need a good full spring lift in the 3.5 to 4 inch range
then regear to 4.10s
then you can get tires
For 33s more lift, 6 inch from jeepinbyal, would also do a steel front diff from him as well with 4.56 gears

How deep are your pockets?
Most go with a good OME full spring lift and 245-75-16s , can run stock gearing
lift is 750/800 and you're good to go

Of course some will come on and say just hack away the fenders etc but it depends on how you want the finished product to be


Ok thanks that helps! And I will keep looking. But I will probably go with the ome lift, I just wanted to know.


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Tue Jan 17, 2012 6:51 pm 
Offline
LOST Member
User avatar

Joined: Tue Apr 05, 2011 11:37 pm
Posts: 302
Location: Cincinnati
Just for reference I spent $2400 between a lift and tires and am not able to run 32's. 245/75/16's here.

_________________
2004 Black Jeep Liberty Renegade 4x4 3.7L
Frankenlift II Baja
245/75/16 General Grabber AT2's

Headlights-3000k HID...illegal
Fog Lights-3000k HID...illegal
Tail Lights- black nightshade...illegal
Turn signals- clear lens w/ clear bulb...illegal
All windows- 5% tint...illegal

Cop following me...CRAP


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Tue Jan 17, 2012 7:04 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
and I spent less than 1300 on lift and tires and run 32s so whats your point ? :ROTFL:
But then I also had to regear

Don't want people thinking they have to spend 2400 for a lift and tires

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Tue Jan 17, 2012 8:33 pm 
Offline
LOST Member
User avatar

Joined: Sun Nov 20, 2011 3:31 pm
Posts: 104
Location: Utah
$1300 isn't bad at all! And a regear isn't a problem at all. Is your lift in your sig?


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Tue Jan 17, 2012 9:00 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
I also wheel and deal a lot for the best possible prices and parts
I have a 1000 dollar lift that I put together for much less
My front diff with 4.10s I paid less for the front diff than some spend on one meal when eating out and other good deals
So if you are willing to shop around, wait for deals etc it can be done cheaper
My first OME lift was on 100,000 miles, and I'm at 45,000 on my second lift
mine at the moment, changing soon possibly
Image

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Wed Jan 18, 2012 5:14 am 
Offline
LOST Member
User avatar

Joined: Sun Nov 20, 2011 3:31 pm
Posts: 104
Location: Utah
Man your jeep looks awesome!!! How is the rough country 3 inch lift? I haven't read anything about people having it. Most have ome.


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Wed Jan 18, 2012 9:12 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Rough Country is one of the worst ones out there
any type of spacer lift is pretty useless unless you have a brand new vehicle and the springs are good
Once they start to sag only way to get a good lift with a good ride is from a full spring lift like OME
Others make spring lifts but their spring rates are same as stock and will sag quickly

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Wed Jan 18, 2012 12:24 pm 
Offline
LOST Member
User avatar

Joined: Sun Nov 20, 2011 3:31 pm
Posts: 104
Location: Utah
tommudd wrote:
Rough Country is one of the worst ones out there
any type of spacer lift is pretty useless unless you have a brand new vehicle and the springs are good
Once they start to sag only way to get a good lift with a good ride is from a full spring lift like OME
Others make spring lifts but their spring rates are same as stock and will sag quickly


Ok that makes sence. Thanks for the info.


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Wed Jan 18, 2012 10:39 pm 
Offline
SFA doesn't snap at the ball joint
SFA doesn't snap at the ball joint
User avatar

Joined: Mon Jul 11, 2005 7:12 pm
Posts: 2213
Location: Spokane, WA
tommudd wrote:
I also wheel and deal a lot for the best possible prices and parts
I have a 1000 dollar lift that I put together for much less
My front diff with 4.10s I paid less for the front diff than some spend on one meal when eating out and other good deals
So if you are willing to shop around, wait for deals etc it can be done cheaper
My first OME lift was on 100,000 miles, and I'm at 45,000 on my second lift
mine at the moment, changing soon possibly
Image

NIce bumper... wonder where that deal came from....
:roll: My jeep is just bareass now...I moon everyone! :goink:

_________________
I'm baaaaccckkk...
LOST Member 10
If you can read this you don't need glasses, go Wheel your Jeep!


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Wed Jan 18, 2012 11:42 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
USAFCOP wrote:
NIce bumper... wonder where that deal came from....
:roll: My jeep is just bareass now...I moon everyone! :goink:


Yeah I wonder where it came from? Some guy said he had a deal and I took it :goink: :ROTFL: :ROTFL: :ROTFL:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Fri Jan 20, 2012 3:02 pm 
Offline
LOST Newbie
User avatar

Joined: Thu Jul 07, 2011 3:06 pm
Posts: 59
Location: Atlanta
tommudd wrote:
My first OME lift was on 100,000 miles, and I'm at 45,000 on my second lift
mine at the moment, changing soon possibly
Image


Hmmm I smell me a SFA coming up! :BANANA:

_________________
02 KJ Renegade = Totaled.

04 KJ Limited OME 927/948, Cragar Soft 8's, General Grabber AT2 245/75/16.


Top
 Profile  
 
 Post subject: Re: dumb question
PostPosted: Fri Jan 20, 2012 3:16 pm 
Offline
Oilburner
Oilburner
User avatar

Joined: Fri Aug 31, 2007 9:54 am
Posts: 2788
Location: Barcelona Spain
crazv6 wrote:
but what all do I need to do to be able to put 32 inch or 33 inch tires

An XJ or a TJ.

:ROTFL:

Sorry couldn't resist.

_________________
Cherokee 2,5 CRD: sold - Wrangler TJ 2.5: gone - Touareg V10 TDI: new toy

Solo Liberty en Español: Jeepliberty.es


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com