I replaced my Thermostat and now I have no heat in the cabin. I think I may have incorrectly installed a couple of the hoses between the thermostat, viscous heater, and heater core. Does anyone have a flow diagram showing the proper routing for all hoses?

Thanks,

Kevin

Got it fixed, found an old topic that explained the routing. I had the small upper hose on thermostat housing incorrectly routed.

There are 3 hoses that connect to the thermostat 1) the very bottom port (aluminum fitting) is the by-pass port that connects to the water-pump inlet, 2) the large plastic port connects via a short formed bent hose to the viscous heater on the passenger side and the drivers side viscous heater hose runs over the tstat to firewall and the heater core, and 3) the small port is the de-gas flow (constant air bleed) to the plastic tank on the firewall, and the large front facing port goes to the radiator.

You may have the viscous heater hoses backwards.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs