After hearing some noise from my front end, I found the passenger inner CV boot torn. all the grease was everywhere except the joint. I figure the joint is shot booty well as the boot. Discount parts has the GSP North America CV Half Shaft, PN NCV82015 for $55. NAPA has a cv for $175.
Is the GSP all I need? is it a complete unit?

Diver

Go to NAPA for a remanned one
best way to go as they have the right size
The cost is oly like 55 -60 bucks when you turn in the old one ( core )

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Listen to TOM go with the napa or a mopar version you do not want to fight with a CV that doesn't fit. So buy the NAPA turn the old one in and be happy with paying $63 and some change for the right CV. Nad i can't remember which side of the Gasser version has the inner shaft coming off the CV. But if it is the passenger side get the half shaft from Erics Auto Parts there is a link somewhere on here.

_________________
My CRD Build Thread
Soon to Come:more lights

Eric is gone from that place and last time I heard they didn't have any
Yes while doing it replace the Intermediate shaft as well since they wear out and the splines actually wear away. Installing a new CV with a worn intermediate will cause more issues

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Anybody have a PN for the NAPA part you're using? I tried the website, but all i got was a $175 CV kit that was all in parts...

Diver

CV Driveshaft - Right Front - Remfd
Part Number: NMD 958484
Product Line: NAPA MaxDrive
Part Number: NMD 958484
Product Line: NAPA MaxDrive
Attributes:
Contents : Axle Nut Included
CV Driveshaft Compressed Length : 23 5/8"
Inboard Joint Type : Female
Includes ABS Inner Sensor Ring : No
Inner Joint Spline Count : 29
Longevity Enhancements : 3% Moly Grease
New Components : Neoprene Boots
Outboard Joint Type : Male
Outer Joint Spline Count : 27

-OR-
CV Driveshaft - Right Front - Remfd
Part Number: NMD 958355
Product Line: NAPA MaxDrive
Part Number: NMD 958355
Product Line: NAPA MaxDrive
Attributes:
Contents : Axle Nut Included
CV Driveshaft Compressed Length : 22 3/4"
Inboard Joint Type : Female
Includes ABS Inner Sensor Ring : No
Inner Joint Spline Count : 29
Longevity Enhancements : 3% Moly Grease
New Components : Neoprene Boots
Outboard Joint Type : Male
Outer Joint Spline Count : 27

one or the other
too tired to walk out to the garage and look tonight

I'll look up the Intermediate shaft number for you also
make it real easy

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited