Hey i have the skyjacker platinum 2.5 lift on my KJ and i lost some height due to my winch/backbone bumper system
soooooooo what i am getting too is can i add 3/8 clevis lit to this set up?
hopefully someone has experimented with this and can help me out
thanks in advance

_________________
2006 kj 6spd white
skyjacker platinum lift with Conduit Clevis lift,
JBA 4.5 UCA
JBA shaved dow CV's
Detours Backbone Bumper System,
Smittybilt 8000lb synthetic line winch, surco roof rack
Cragar Soft 8 Silver Wheels
4.10 gears, 245/75/16 Wrangler Authority A/T
Pinch welds annihilated
Class III rear hitch



HOPEFULLY adding a snorkel soon

It may help for a short time but in the end heavier springs are or will be needed.
Unless its a very early Skyjacker kit spring rate is only 310 lbs same as stock. So even with a clevis lift its going to keep sagging with the extra weight on there.
OME 927s are 400 lb for comparison

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited