I see these torque values for the front sway bar:

Stabilizer Bar Clamp Nut 110
Stabilizer Bar Link Upper Nut 100
Stabilizer Bar Link Lower Nut 85

Question is ... which one is the "clamp nut"? Can someone describe to locations of these three named nuts?

Thanks!

_________________
DIRTY KJ :: flickr photostream
"Primitive life is very common and intelligent life is fairly rare ... some would say it has yet to occur on Earth" --- Stephen Hawking

The Upper on Lower bolts are on the ends near the tires and connected to the swaybar link.

The Stabilizer Bar Clamp must be the 2 rectangular bushings in the middle of the Bar, two bolts each.

_________________
2002 Liberty Limited
2.5" Rusty's Coil Lift + OME 927 springs + 1/4" spacers
265x70 Revos
Warn 4x Floods
ARB bumper
TeraFlex extended front bumpstops
Rock Lizard Skink Super Sliders
Bosch Size 86 battery
Jeepin by Al's 4.5 UC Arms
Kryptonite Differential Cover
JBA Bolt on KJ Tri-Angulated 4 Link

That's correct. The clamp nuts are the ones that hold the bushing and metal bracket over the stabilizer bar and essentially pin it to the cross member.