Hi I just did the elephant hose mod with the clear 3/4 I D hose like the diagram. Is it normal that there is smoke coming out of the hose and it smells. has anyone routed the hose along the rails to lets say to near the rear. Thanks Bill

Yes, and yes.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.

ok did you dump yours under the engine or extend the hose further back to the rear of the liberty

Its normal to get the smoke coming out of the EHM and soon you'll also get some oil spots on your driveway for the hose. I ran mine all the way back to my exhaust and ran like that for about 1 1/2 years and never had problems. I did drill a few small holes on the hose in the engine bay so it wouldn't blow the turbo seals in case it got clogged. standing behind it, looked like the smoke was coming out from the exhaust.

_________________
Horse Power: How fast you hit a wall.
Torque: How much of the wall you take with you.

06 CRD
OME HD w/clevis top plate
JBA 4.5 UCAs
245/75/16r Goodyear Duratrax
Fumoto Valve, V6 ABM
Rock Lizard Super Skinks
Cobra 75 WX ST
ECO GDE tune, 2.5 straight piped
ProVent, Samcoed
Non F37ed TCM
DieHard P1

Thanks for the tip

vmkjcrd you said you ran it that way for 1 1/2 years how com you dont run it that way anymore

Because I found a member selling his provent for 40 dollars. They usually go from 130 to 150 so I couldn't let that one get away!

If it wasn't for that I would still have the hose on.

_________________
Horse Power: How fast you hit a wall.
Torque: How much of the wall you take with you.

06 CRD
OME HD w/clevis top plate
JBA 4.5 UCAs
245/75/16r Goodyear Duratrax
Fumoto Valve, V6 ABM
Rock Lizard Super Skinks
Cobra 75 WX ST
ECO GDE tune, 2.5 straight piped
ProVent, Samcoed
Non F37ed TCM
DieHard P1