WolverineFW wrote:
Randy B wrote:
Quick way to check the sensor. Did you check the resistance of the outdoor air sensor, at 68 degrees it should read 10000-13000 ohms. And it should change value when temp changes. That will rule out that.
Was that value in the service manual? If so do they have one for 32 degrees since it would be easier to stick the sensor in an ice bath to rule out temp fluctuations when reading the resistance.
Yes it is right out of the FSM page 8M-15 2005,
That chapter has all the EVIC info. hope it helps
Login
Register
FAQ
Search
