THE OHIO CHAT ROOM!!!

tommudd · **Posted:** Tue Jun 26, 2012 9:54 am

BugginKJ wrote:

tommudd wrote:

Then people schedule you to move items across state lines ................

So how is everyone's summer going so far ??

It's only a small load of burlap sacks or did I forget to describe said "items" :shock:

Very well if we don't get caught.
:jester:

I assume "filled " burlap sacks???? :shock:

Ah heck if we tarp the load no one will know

have house guests coming Saturday to stay at Mudd's B&B (from 6/30 to 7/14), then get ready for lionseye to show up sometime week of 7/23 with M&G that following week
Summer is going by rather quickly

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Ohhhhhhhh I don't know, I was hired to just drive :jester:

Mudd's B&B has been rather busy this summer :5SHOTS:

Did the grass ever grow back where Daryl .......... ah never mind :dizzy:

Ohhhhhhhhh yea and I finaly got a hold of Larry :pepper:

slippery lil fellow though, his neck slipped right out of my hands :ROTFL:

tommudd · **Posted:** Tue Jun 26, 2012 1:43 pm

Larry just left ...................
Now what was he wanted ????????????

KJWildman · **Posted:** Tue Jun 26, 2012 6:12 pm

tommudd wrote:

Larry just left ...................
Now what was he wanted ????????????

uhhhhhhhh........ I forget! :roll:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

KJWildman wrote:

tommudd wrote:

Larry just left ...................
Now what was he wanted ????????????

uhhhhhhhh........ I forget! :roll:

let me help..............
the trailer to take the hoist back to my buddy for us :shock:

edit: forgot to add.........he was going to drop off a schedule as to when we can go work on our KJ :jester:

Ted15 · **Posted:** Wed Jun 27, 2012 6:06 am

Hey Tom, and anyone else who may know, I've been looking around for a smaller set of pole spring spacers for the rear of my KK. I have a set of two inch spacers now but that gives me 1" of rake which seems like too much. I'd like to drop to 1"-1 1/2" or so. There are a bunch of different ones out there that look like they might fit but what I'd like to find I'd a manufacturer of them so thet I can order the size I want from their engineering data. If someone could direct me in the right direction I'd appreciate it. I've been looking but everything that comes up so far is for specific vehicles, I'm looking for the dimensions which aren't usually listed. Thanks.

tommudd · **Posted:** Wed Jun 27, 2012 1:52 pm

ted,
I thought you had a set of compressors already??

Also where did you get the upper plate and upper and lower isolators for the front from?
trying to find everything to get this lift on. :banghead:

Ted15 · **Posted:** Wed Jun 27, 2012 2:43 pm

I have a set of spring compressors, that's not what I need but if you're looking for a set I'd be glad to loan it to you. I don't think it'll fit our heavy duty springs without grinding about an eighth of an inch from the top. They should work on the rear though.
I purchased two rear spring isolators from JBA when I installed the spacer lift and I got four top plate spacers (1/4" each) from JBA when I got the OME suspension. There are two spacers still installed from the spacer lift (2"). I need a set about 1" I think to drop a little of the rake from the rear. I may even cincider adding some of those trim packers like what came with your new set-up. We're they part of the suspension or available seperately? I looked on JBA's site but didn't see them.

Ted15 · **Posted:** Wed Jun 27, 2012 2:46 pm

The isolators are the ones that came out of the colovers. I had a shop put it together for me this time and they have a big spring compressor.
I was able to find them fairly easily when I was looking for them, once I had the part numbers. I may still have the info, if you want, I'll see if I can find it.

tommudd · **Posted:** Wed Jun 27, 2012 11:24 pm

Why was I thinking you wanted a set of coil spring compressors :banghead:

Oh well no I don't want any ever/never/ not this lifetime :wink:

unless they are air over and real strong! heck my 790s at the shop flew out and chipped their concrete block wall 15 foot away :ROTFL:

Not sure if they would work but LTT makes rear spacers an inch tall for the KJ rear springs
I oreder the top mounts and isos from NAPA today, have to go to the dealership for the lower ones tomorrow and then throw these puppies on and see how they do :wink:

Oh well inside fo the Kj is fairly clean, outside gets it tomorrow
shop gets more cleaning and more thing throw away
NO MORE junk will be moved in unless it makes me money :furious:

cleaned the concrete pad as well today with the power washer by the way............................ :furious:

tommudd · **Posted:** Thu Jun 28, 2012 2:46 am

where is everyone
:shock:

Marlon_JBT · **Posted:** Thu Jun 28, 2012 4:44 am

I'm hungry.

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

tommudd wrote:

where is everyone
:shock:

right here :jester:

Marlon_JBT wrote:

I'm hungry.

Mudd's B&B puts on a fantastic spread, it was even written up in the Swantucky Times before the Cornfest article. I hear tell the atmosphere is going to a jungle theme however, they may even play the tin drums as soothing background music :pepper:

tommudd · **Posted:** Thu Jun 28, 2012 10:24 am

MMM didn't think we had released the menu yet
but yes looking at chapati's , somosa's, curry beef and ,.....................

tommudd · **Posted:** Thu Jun 28, 2012 1:37 pm

Marlon

Still have the top plates I gave you ??
I need to "borrow" them for a while for this new lift :wink:

Hope to install it next week

Marlon_JBT · **Posted:** Thu Jun 28, 2012 1:43 pm

tommudd wrote:

Marlon

Still have the top plates I gave you ??
I need to "borrow" them for a while for this new lift :wink:

Hope to install it next week

Yup, still have them. You can have them back, actually.

But uh, how am I gonna get them to you?

tommudd · **Posted:** Thu Jun 28, 2012 3:30 pm

Marlon_JBT wrote:

tommudd wrote:

Marlon

Still have the top plates I gave you ??
I need to "borrow" them for a while for this new lift :wink:

Hope to install it next week

Yup, still have them. You can have them back, actually.

But uh, how am I gonna get them to you?

Don't know :shock:

I have one 3/8s and a 1/4 one here may throw them in for the time being to start getting it sit up
You know I'll have it in and out a few times before it suits me :ROTFL:

KJWildman · **Posted:** Thu Jun 28, 2012 11:00 pm

Tom or Hart, are we still on for tomorrow? If so, what time?

tommudd · **Posted:** Thu Jun 28, 2012 11:06 pm

KJWildman wrote:

Tom or Hart, are we still on for tomorrow? If so, what time?

Meeting for breakfast at 6 AM
err wait maybe 8:30-9:00 ????
Hart is going to call in the AM then
ride out here on the bike, get some breakfast
hook up the trailer/get some go juice
and head on in
but we can call ya when ......

KJWildman · **Posted:** Thu Jun 28, 2012 11:18 pm

Sounds good. I should be home from work by 1:30, bed by 2:30,I should be able to get up by 8:30! :seuss:

That gives me a good 6 hours sleep. I'll be able to go till 2:30a Saturday morning on that! :BANANA:

THE OHIO CHAT ROOM!!!

Who is online