what do i need to remove it and can dríve without it while getting it fixed ?

_________________
05 liberty CRD Limited - suncoast TC , GDE Turbo , GDE TCM Tune 2gen OEM filter head, stant 195 tsat, Autoandart Window Fix, New TB kit ~190k (Geordi)
06 Liberty CRD Limited - stant 195 tstat Autoandart Window Fix, 2gen OEM filter head, New TB kit ~180k (Geordi), GDE Turbo, GDE TCM ECO tune

well i got jt off , found out it has 6 8mm bolts on each end , I see now why it sounded like fire alarm bell, rear end bearing gone

_________________
05 liberty CRD Limited - suncoast TC , GDE Turbo , GDE TCM Tune 2gen OEM filter head, stant 195 tsat, Autoandart Window Fix, New TB kit ~190k (Geordi)
06 Liberty CRD Limited - stant 195 tstat Autoandart Window Fix, 2gen OEM filter head, New TB kit ~180k (Geordi), GDE Turbo, GDE TCM ECO tune

You can drive it without the front drive shaft in it for quite awhile but if your jeep is lifted you may end up with some issues like I did with mine. The rear joint failed along with my front I replaced them both per-instructions within 2 hours of highway driving the rear was shot. And I mean it locked up solid so time for a completely new driveshaft design. I can give you the name of a company that rebuilds all the driveshafts for the NAPAs on the east coast. Also has built countless off road and high horse power drive shafts. They built my front and gave me 2 new yokes for front and rear for 320.

_________________
My CRD Build Thread
Soon to Come:more lights