Upper Control Arms

fish1 · **Posted:** Tue Oct 30, 2012 9:54 am

Got these off ebay for $60.00 ! Seller said they were off of a 03 liberty. No part numbers on them can anyone id these ? Are they Al's ?

tommudd · **Posted:** Tue Oct 30, 2012 10:19 am

They could be a very early set,
look like it
good for wall decoration

tjkj2002 · **Posted:** Tue Oct 30, 2012 10:26 am

Those look like GenIII or possible GenIV JBA's.I rocked GENII's JBA's all the way up to my SFA swap.

tommudd · **Posted:** Tue Oct 30, 2012 10:48 am

Looking at them closer I'd say 3s
If you want to try and use them check the welds near the ball joint bung very close. I had bought a used set and both were cracked at the welds. They were an very early set

fish1 · **Posted:** Tue Oct 30, 2012 11:30 am

Thanks for the replies. Can the welds be strengthened ? How much lift is required to use these ? I just like having greaseable ball joints.

tommudd · **Posted:** Tue Oct 30, 2012 11:54 am

Not really unless you know what you are doing and have some fabrication skills
are the boots good on them, one looks torn, but maybe just dirt or shadow
For those 2-2.5 inches
Later ones have a different angle on the ball joint and also are a little longer as well
I think I know where my original set of 3's are up in the attic and I also have a set of early 4.5s here. If I can round them both up, I'll take a picture and show you

fish1 · **Posted:** Tue Oct 30, 2012 12:07 pm

Boots are not torn,they are loose from the ball joint. I don't plan on doing a lift right now so i will just hold on to them for the time being.Thats my problem i buy parts never use them throw them in the shed.I can add them to the suspension parts i have left over from my dodge ram owell maybe i will have a yard sale someday.Need to stop clicking on that buy now button on ebay :lol:

tommudd · **Posted:** Tue Oct 30, 2012 12:29 pm

Ah I know about extra parts, I have enough to build a KJ almost except for body :ROTFL:

Upper Control Arms

Who is online