rubber cup holders

dejesu · **Joined:** Fri Dec 23, 2011 7:47 pm **Posts:** 96

the cup holders in the front by the console- can they be removed to be washed?

tommudd · **Posted:** Mon Jan 07, 2013 6:28 pm

If you're talking about the rubber insert, then yes they can be

dejesu · **Joined:** Fri Dec 23, 2011 7:47 pm **Posts:** 96

tommudd wrote:

If you're talking about the rubber insert, then yes they can be

do you just pick them up and remove them? or do you have to get inside of something?

tommudd · **Posted:** Mon Jan 07, 2013 8:23 pm

Just pull them up out

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

tommudd wrote:

Just pull them up out

When i bought mine it was "glued" in from all the soda. Just gave it a good tug.

Sent from my Home Phone using Tapatalk 2

TheBlueKJ · **Posted:** Mon Jan 07, 2013 9:05 pm

4x4kayak2112 wrote:

tommudd wrote:

Just pull them up out

When i bought mine it was "glued" in from all the soda. Just gave it a good tug.

Sent from my Home Phone using Tapatalk 2

That's nasty. Hope you gave them a good rinse!

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

About once a week at work I detail my jeep inside and out.

But i dont have any carpet and about to bed line the inside, so i just pull my plugs and wash it out. But all the plastic i wipe down with sani-wipes i get from the hospitals.

Btw im a paramedic so i get alot of free time at work, sunday i slept for 13 hours. Not too bad.

Sent from my Home Phone using Tapatalk 2

TheBlueKJ · **Posted:** Tue Jan 08, 2013 11:50 am

4x4kayak2112 wrote:

About once a week at work I detail my jeep inside and out.

But i dont have any carpet and about to bed line the inside, so i just pull my plugs and wash it out. But all the plastic i wipe down with sani-wipes i get from the hospitals.

Btw im a paramedic so i get alot of free time at work, sunday i slept for 13 hours. Not too bad.

Sent from my Home Phone using Tapatalk 2

Nice my friend is a fireman and he gets alot of free time too. 12 hours of doing nothing sometimes.

So did you just rip out all of the carpet so just the bare metal is showing? I was thinking of doing something like that and rubberizing the floor.

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

Yep i ripped all my carpet out, i rerouted all my wires under the side interior molding. Theres plastic covers that hide all the wire from the factory. I took those out and put in sheet metal. Im planning on bed lining the floor.

Ill take a few pics when i get back to the station.
Sent from my Home Phone using Tapatalk 2

TheBlueKJ · **Posted:** Tue Jan 08, 2013 2:14 pm

Nice. The sheet metals a good idea can't wait to see the pics.

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

It isnt much, i just had some sheet metal lying around the house, cut it to fit, and screwed it down. Now i just have to find rubber plugs for the drain holes, the factory ones are ment to never be pulled out. Right now i have them duct taped down.

Once i find some floor plugs i will bed line it.

Sent from my Home Phone using Tapatalk 2

TheBlueKJ · **Posted:** Tue Jan 08, 2013 6:04 pm

Looks good!

sailwa66 · **Joined:** Mon May 14, 2012 9:57 am **Posts:** 32

Most of the bed liner products are polyurethane-based, and therefore a bit flammable... just a thought. :shock:

Also, I used it on the floor of my rock buggy, and the texture is a pain in the arse to clean.

In my last trail rig/daily driver, I just pulled the carpet, and used Husky liners... worked great.

Might try www.mcmaster.com for the plugs.

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

sailwa66 wrote:

Most of the bed liner products are polyurethane-based, and therefore a bit flammable... just a thought. :shock:

Also, I used it on the floor of my rock buggy, and the texture is a pain in the arse to clean.

In my last trail rig/daily driver, I just pulled the carpet, and used Husky liners... worked great.

Might try http://www.mcmaster.com for the plugs.

Thanks for the info.

But isnt carpet a bit flammable too, lol. Im still deciding if im gonna roll it or spray it.

Sent from my Home Phone using Tapatalk 2

rubber cup holders

Who is online