THE OHIO CHAT ROOM!!!

Marlon_JBT · **Posted:** Sun May 05, 2013 8:04 pm

BWAHAHAHAHAHAHAHAHAHAHAHAHA!!!!!!!!!!!!!!!!!!!

That was after I had already pulled it up to the mound you see. It was near 50% submerged You can see the original "water line" on the last shot. When they were able to get out, water just came POURING out the interior. So I finished my good deed by pulling them all the way out!

Everyone wanted to know what kind of "motor" (engine) I had, and before that were telling me that it was impossible because a TJ couldn't do it.

TwoBobsKJ · **Joined:** Fri May 11, 2012 8:03 pm **Posts:** 463

Ted15 wrote:

tommudd wrote:

Good talking to you Ted!

Check this out

I really, REALLY like that, Ted! Nice paint job and the rock lizard is the icing on the cake. Well done! :BANANA:

Bob

TwoBobsKJ · **Joined:** Fri May 11, 2012 8:03 pm **Posts:** 463

Marlon_JBT wrote:

BWAHAHAHAHAHAHAHAHAHAHAHAHA!!!!!!!!!!!!!!!!!!!

That was after I had already pulled it up to the mound you see. It was near 50% submerged You can see the original "water line" on the last shot. When they were able to get out, water just came POURING out the interior. So I finished my good deed by pulling them all the way out!

Everyone wanted to know what kind of "motor" (engine) I had, and before that were telling me that it was impossible because a TJ couldn't do it.

Marlon, that is awesome!! :pepper:

Impossible, eh? This Libby don't know the word! :seuss:

Bob

Ted15 · **Posted:** Sun May 05, 2013 8:29 pm

TwoBobsKJ wrote:

Ted15 wrote:

tommudd wrote:

Good talking to you Ted!

Check this out

I really, REALLY like that, Ted! Nice paint job and the rock lizard is the icing on the cake. Well done! :BANANA:

Bob

Why thank you sir, I like it too. :JEEPIN:

Marlon_JBT · **Posted:** Sun May 05, 2013 8:35 pm

I will admit, and others can probably tell you who have seen me wheel before...

I did wheel a bit more daring and harder than I usually do...

Mostly because I no longer HAVE to drive my Jeep DAILY.

Heh.

TwoBobsKJ · **Joined:** Fri May 11, 2012 8:03 pm **Posts:** 463

Tom, I'm sure you'd rather get your exercise another way but at least there is some benefit to the Libby's vibes.

If it's not the front end, the driveshafts, motor mounts...but it is felt at 15mph or higher throughout the entire Jeep. Maybe you said this and I missed it...When you're in Park and goose the throttle and hold it at 2000 rpm or so do you feel the vibes? If not then it has to be somewhere from the torque converter on back. But if you DO feel the vibrations when in Park it could be in the engine or the trans on back.

Dang, I'm flustered for you :furious:

Bob

TwoBobsKJ · **Joined:** Fri May 11, 2012 8:03 pm **Posts:** 463

Marlon_JBT wrote:

I will admit, and others can probably tell you who have seen me wheel before...

I did wheel a bit more daring and harder than I usually do...

Mostly because I no longer HAVE to drive my Jeep DAILY.

Heh.

Ha, having the Dart does take away the "wheeling pucker factor," doesn't it? :ROTFL:

Bob

Marlon_JBT · **Posted:** Sun May 05, 2013 8:47 pm

I still think it's Tom's transmission or something along those lines.

Bob, I wasn't nervous the entire trip. This time I didn't even worry about scratches! I think I moved ONE branch out of the way. That's not normal for me. I usually have my hand out getting rid of all of them I can and avoiding the others!

It's a lot more fun this way!

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

tommudd wrote:

Phone and Internet working again :BANANA:

went off last night :banghead:

Hart had just called and ................................
Was hoping I could convince him to come out and give some much needed "other ideas"
my brain is dead trying to figure out this thing :ROTFL:

Oh well , off to Swanton, going to see how long it takes to walk it
Google say 1.5 hours , me out of shape , 1.5..............days :dead:

Sorry about the phone tag thing. After I hung up with my mom I tried calling you back but got nothing, then my phone went deadc :roll:

. I have to find out from momma if my doc appointment is tomorrow or not, I can't remember. I would be happy to come out and lend ya hand figuring this out. I also couldn't call ya today becuase my cable went out which is where my phone is also through :banghead:

To my surprise they came out and fixed it today but I think that may be because my neighbors also have the same crap, theirs went out also :banghead:

. Either way I was swamped busy banging out the glass block windows this weekend. Got them all done but 1 :shock:

Super easy and they look awesome, just time consuming is all running in and out of the house. Started to make some trim for the interior of them tonight but ran out of steam and wood :ROTFL:

Not only that it was my boys birthday so I had to pause some for some burgers and beer. Wow 23 he is now, how time flies :shock:

501 wrote:

tommudd wrote:

Oh well , off to Swanton, going to see how long it takes to walk it
Google say 1.5 hours , me out of shape , 1.5..............days :dead:

Wish I lived closer Tom......

To bad you don't have anybody that lives closer by that could help you out.

Bite me!

You owe me some fine Indiana fire water for that :jester:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Ted15 wrote:

Here ya go Hart

Awesome to see the lil tikes getting out there! :pepper:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

tommudd wrote:

Phone and Internet working again :BANANA:

went off last night :banghead:

Hart had just called and ................................
Was hoping I could convince him to come out and give some much needed "other ideas"
my brain is dead trying to figure out this thing :ROTFL:

Oh well , off to Swanton, going to see how long it takes to walk it
Google say 1.5 hours , me out of shape , 1.5..............days :dead:

You freekin walked there!?!?!?!?!?!

KJWildman · **Posted:** Sun May 05, 2013 11:21 pm

I thought he was talking about me!:roll: After all I'm only 1/2 miles up the road!

I called and yelled at him for not calling me for a ride! He's only 3 houses from the corner where we turn to go to Kroger's and my wife just went last night while I was at work. He said he was afraid someone would see him out with my wife on a Saturday night and tell me she was messing around. :shock:

Sent from my SCH-M828C using Tapatalk 2

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Ted15 wrote:

Check this out

[/quote]
[/quote]
Not going to say I like your lizard :shock:

but I like the lil green thingy on you sliders :ROTFL:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

KJWildman wrote:

I thought he was talking about me!:roll: After all I'm only 1/2 miles up the road!

I called and yelled at him for not calling me for a ride! He's only 3 houses from the corner where we turn to go to Kroger's and my wife just went last night while I was at work. He said he was afraid someone would see him out with my wife on a Saturday night and tell me she was messing around. :shock:

Sent from my SCH-M828C using Tapatalk 2

and ya wonder why she's smiling so much lately.......
:ROTFL:

tommudd · **Posted:** Sun May 05, 2013 11:45 pm

BugginKJ wrote:

KJWildman wrote:

I thought he was talking about me!:roll: After all I'm only 1/2 miles up the road!

I called and yelled at him for not calling me for a ride! He's only 3 houses from the corner where we turn to go to Kroger's and my wife just went last night while I was at work. He said he was afraid someone would see him out with my wife on a Saturday night and tell me she was messing around. :shock:

Sent from my SCH-M828C using Tapatalk 2

and ya wonder why she's smiling so much lately.......
:ROTFL:

SSSSHHHHHHHHHHHHHHH
ya said you keep it quiet
:goink:

Ted15 · **Posted:** Mon May 06, 2013 12:01 am

BugginKJ wrote:

Ted15 wrote:

Here ya go Hart

Awesome to see the lil tikes getting out there! :pepper:

Look closely, that's the other shot from legoland of the little mx track. Pretty good detail I think.

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Ted15 wrote:

BugginKJ wrote:

Ted15 wrote:

Here ya go Hart

Awesome to see the lil tikes getting out there! :pepper:

Look closely, that's the other shot from legoland of the little mx track. Pretty good detail I think.

ok I have had a couple drinks :5SHOTS:

edit: it helped to click on it and put my glasses on :ROTFL:

tommudd · **Posted:** Mon May 06, 2013 12:05 pm

Well had it into the shop that was responsible for the trans swap:
Drove and came back up on the hoist
Them;
First thing-its lifted too much
Me;
well if that is the case why hasn't it vibrated in the last 160,000 miles?
Them;
bet the CV angles up front are way too much
Me;
well again its been lifted most of its life, no vibes, and if you look there are no CVs in the front right now and still does it!
Them;
Well the front driveshaft angle is too steep
Me back to lifted a long time, no vibes plus the angle of the front driveshaft does not change when lifted PLUS LOOK OPEN your eyes front driveshaft is out of it as well

See a pattern here has to be something other than what they did
If my Jeep wouldn't of been on the lift I would of left sooner but had to wait for them to drop it down off.
They have an answer for everything no matter if it makes sense or not
First time I've used a shop for anything but alignments in over 15 years and :dizzy:

John3:17 · **Posted:** Mon May 06, 2013 12:17 pm

I feel your pain bro, and ive about had it with napa - first tc driveshaft head supposed to be in stock (we can have it for you by 7am tomorrow - state inspection is at 10) so I said ok. So while im there I get a front brake pad and rotor kit, might as well make good use of my day off. Well back home and back up on jack stands opened up the new rotor box(thank God I did it before I tore it apart and had to walk to napa) Rotors dont look right, so I call them up give them the part number - your right sir those are the wrong rotors we can get you the right ones by 1:00. Meanwhile half my day is shot. :banghead:

Good luck Tom!

Ted15 · **Posted:** Mon May 06, 2013 1:06 pm

That's the same kind of crap the dealer told me. Yesterday, I started working on mine. I wanted to see if I needed longer link arms. I removed one and what do you think I saw? There is absolutely no difference in height at full droop. That means the geometry is the same as stock. Even the mechanics don't understand how these things work. Bunch of grease monkeys anyway, some of them.

THE OHIO CHAT ROOM!!!

Who is online