so you know how wranglers put the kc lights by the window is there a way to do that with a liberty or does anyone have a write up on it?

_________________
02 kj 09 wrangler sport rims
kj budget boost from rocky-road.com
skyjacker nitro 8000 rear shocks
[img][IMG]http://i1302.photobucket.com/albums/ag131/02libertykj/doorless_zps7644f6fd.jpg[/img][/img]

Some folks have drilled down through the plastic and installed them there
Problem is they will move around and vibrate quite a bit since there is not much holding them
I'm working on an idea at the moment , we'll see how it works out

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I'm interested to see what you come up with tom!

_________________
03 Sport - SEMI DIGGERIZED, Surco Rack with Daylighters, OME Lift, Runcool Hood Louvers, RL Front Bumper and Super Skink Sliders, 31" BFG AT/KO on Soft 8s, Skid Row/Mopar Skids, 8k Smittybilt Winch with Synthetic Line.
MY BUILD: viewtopic.php?f=3&t=59628

Something like this up near the windshield? (not my picture just found it while searching)

_________________
2010 Jeep JK - Mango Tango
TeraFlex 2.5 suspension lift
Rancho RS9000Xl adjustable shocks
Tom Woods 1310 Front driveshaft
JKS Quicker front Disconnects
Synergy 1.75" Wheel spacer

yeah just like that i was thinking a bracket that i can just use self tapping screws to mount it

_________________
02 kj 09 wrangler sport rims
kj budget boost from rocky-road.com
skyjacker nitro 8000 rear shocks
[img][IMG]http://i1302.photobucket.com/albums/ag131/02libertykj/doorless_zps7644f6fd.jpg[/img][/img]