Hi guys the Heat/AC blower in my crd o6 is acting up it only works at No 4 setting only and if i try to lower it cuts off any ideas suggestion to fix that or take one in the gut and replace with a new unit. If some one has blower replacement done then it will be helpful too. thanks.

I've seen this reported before take a look at this viewtopic.php?f=5&t=75784&hilit=blower+resistor

It was either on this forum or another, where there were pics to go along with some instructions. But a quick search here offers some food for thought.

_________________
JW
'06 CRD - stock

The resistor is dead. See my posts on that link including the one with how to fix instructions although I lack pictures. Any decent local parts store should have the resistor or can get it but do insist on the resistor listed not the one that their "book" will say is what you need as the listed one is heavy duty.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Yes, resistor is bad. It's right behind your glove box. Should be a $20 fix. I will say be careful with your hands in there, I cut the crap out of myself.

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings

Yeah, just replaced the resistors on both CRD's recently.

_________________
2006 LTD Bright Silver loaded with all the needed mods, CCV intact.
Proudly supporting CRD vendors, and their development of quality parts and accessories.
Equipped with HDS thermostat, plenty of heat, faster warm-ups, increased fuel mileage.

Thx for providing the solution as I was stumped, annoyed & .
Now if someone could just point me to a part number or what to ask for when I head into NAPA that will be cool thx again.

Thx guys I got one from china zone for 20 bucks with lifetime warranty. It is working as good as new as it was not woking on low setting of 1 earlier.