Laws aren't fun anyway. Had a friend swap leaf springs for coil-overs on an YJ, and it made it non-inspectable up here in Maine. (Original suspension cannot be disconnected.) Also the books up here say only 2 inches over stock manufacturer recommended size. So how many would be S.O.L. up here? All the SAS's, and everyone running 32's? Now quit arguing with people and go get that thing in up and running. We want video too:)

_________________
Ironman HD springs, Bilsteins, MLL's, Mopar skids 245 75 16 Treadwright Claw's.

Alright lol and there will deffinately be videos I really wanna get most of it done before Christmas but it probably won't happen that quick lol

_________________
350 swap
http://www.jeepkj.com/forum/f196/my-350-swap-54975/

2.5 inch lift
265/75/16s
on Moabs
Removed REAR sway bar
TMS 50x38" Roof Rack
Walmart lights/Custom rear shelf/Cut bumper

My buddy gave me the speedometer that I wanted for some old wheels. And I also have the fuel gauge that I need. And I've already got the oil, volts, and temp in the a pillar



My dad is going to buy the exhaust manifolds as an early Christmas present:head3:
So there's $185 I dont have to spend and I called today to my local driveshaft and exhaust shop. About $250 for driveshaft front and rear and about $150 For the exhaust work. Not bad prices :cheers:
I was expecting to get bent over pretty bad lol
I just went shopping at auto zone and came back $60 poorer with a tach and speedometer cable lol the tach is a little bit bigger than the speedometer that I bought already. But I dont care lol. Now I just have one more gauge to buy... An ammeter

Here is how my swap is going so far money wise. I've been keeping track of what I've bought and what I need in Google Drive on my phone and on my tablet.

_________________
350 swap
http://www.jeepkj.com/forum/f196/my-350-swap-54975/

2.5 inch lift
265/75/16s
on Moabs
Removed REAR sway bar
TMS 50x38" Roof Rack
Walmart lights/Custom rear shelf/Cut bumper

My manifolds came in last night at 8:30!!! Super excited. Getting pretty close to completion!

_________________
350 swap
http://www.jeepkj.com/forum/f196/my-350-swap-54975/

2.5 inch lift
265/75/16s
on Moabs
Removed REAR sway bar
TMS 50x38" Roof Rack
Walmart lights/Custom rear shelf/Cut bumper

Just finished painting my manifolds!

_________________
350 swap
http://www.jeepkj.com/forum/f196/my-350-swap-54975/

2.5 inch lift
265/75/16s
on Moabs
Removed REAR sway bar
TMS 50x38" Roof Rack
Walmart lights/Custom rear shelf/Cut bumper

And I've already got the oil, volts, and temp in the a pillar[/url]

[url=http://s1279.photobucket.com/user/kj04libby/media/IMAG0348_zps9885c1a7.jpg.html]


Do you remember what brand "A" pillar gauge pod you have???? I have only seen the two gauge ones....

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.

I bought it at auto zone for $20 bucks then fiberglassed it and bondo'd it. Then painted it black. And also paint the passenger side to match

_________________
350 swap
http://www.jeepkj.com/forum/f196/my-350-swap-54975/

2.5 inch lift
265/75/16s
on Moabs
Removed REAR sway bar
TMS 50x38" Roof Rack
Walmart lights/Custom rear shelf/Cut bumper