I have already cut mine out myself, but I noticed on Amazon today that someone is finally selling an aftermarket double din dash kit for the 2003-2007 Liberty. It is made by CIP and costs $135-$170 on Amazon, including a wiring harness. Price varies depending on the finish and harness type, I think.

Here is a link on Amazon:

http://www.amazon.com/Liberty-Aftermarket-Installation-Standard-Harness/dp/B00E8SA5P0/ref=sr_1_2?ie=UTF8&qid=1383842864&sr=8-2&keywords=2004+jeep+liberty+double+din

Did you see there's even a Mossy Oak version? Might just be my next upgrade, I hate the factory stereo.

_________________
God, Guns, Bucks and Trucks

Groovy! Wonder with LostJeep member is making these in their basement.. Haha

I would consider buying one but I bought a new head unit and new Kicker brand speakers (which haven't blown or distorted once) in the 4 doors and dash were the first purchase for my KJ way back when.

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.
31X10.5 Duratracs
Yukon / Motive Gear 4.10's
Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS

Hmmmm... I can see one of these in my future.

Dear Santa,

I have been a very good boy and...

_________________
--Prof

927/948 OME Springs - Bilstein Shocks - JBA Upper Control Arms - Rage Black Widow Roof Basket - Viper 3606V Alarm System

Drat.... I just bought a new Kenwood single DIN, and the adapter that has a small storage bin under the receiver, in August.

_________________
2002 KJ 4X4, 3.7, 5 speed, offroad pkg, loaded, Moabs and Hankook A/Ts, Kenwood/ Alpine sound. Tommudd 3.5" econo lift and JBA A arms

i found them on EBAY a while back. The only thing that stinks is they dont have it in the silver limited trim(I asked).

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs

I will be picking this up soon

_________________
Silver 05 sport crd-Ehm,Orm,wix oversized oilfilter,shell rotell,2nd gen fuelhead,Fumoto oil drain valve,muffler delete,cat removed,V6 airbox swap,evic added,HVAC controls modded, Franken lifted II,hercules Terra Tracs 245/75/16,Full l.e.d. interior swap,hayden fan clutch and nylon fan

Let me know how you like it. I am this close to pulling the trigger, but have been waiting for at least one or two reviews.

_________________
--Prof

927/948 OME Springs - Bilstein Shocks - JBA Upper Control Arms - Rage Black Widow Roof Basket - Viper 3606V Alarm System

At 134.99??? I think id rather make my own.... face it... its not that difficult with a little crafting skills. Now if it were $30 heck yeah id jump on it!

_________________
"Each human being has an integrity that can be hurt only by the act of that same human being and not by the act of another human being." -Angel and the Badmen (1947)

06 Jeep Liberty CRD Sport 112K miles, Clevis Lift, Front bumper trim, Straight Pipe Exhaust, Open Air Box Mod, PCV Bypass, Cobra CB, Rear Cargo Deck, 6 Lights, Roof Rack

I came across those on ebay a few weeks ago. I think it's not that bad of a price considering you are paying for the trim ring as well. I would like to see better quality pictures other then the ones they show. Im thinking about getting one soon to put my avh-x8600 in. If you screw up, you are looking at the cost of another trim ring, plus materials. Most guys with little/no experience are going to be hesitant to try a 2nd time if they mess up. I've seen some that looked factory, and I've seen some hack jobs as well. I'm fine paying $134.99 for convenience and clean look. Im concerned about how evenly blended they are, and the appearance of the paint they use. $134.99 for a nicely fab'd piece would be fine. Unevenly rounded edges, highs and lows, poor blending, and splotchy paint would be a different story.

Anchorism: I made that mistake when I glassed my scanner and cb into the dash of a rig I had. The $30 it should have cost turned into $100, and the 3 day project turned into 2 weeks. Newbie's are gonna make mistakes. I ended up doing ALOT of sanding! I am ocd about things like that, and it took alot of work to get it perfect. It turned out great, and I got alot of compliments. If someone sold a kit to do that for $134, I would've gladly paid that...

Sent from my Lumia 900 using Tapatalk

I second that. So only the Limited has the silver? I guess it could be painted but what a hassle.

Sent from my SM-N900V using Tapatalk

_________________
2006 Jeep Liberty Limited CRD (purchased 10/30/12 w/ 52k miles) GDE HotTune & Eco TCU, Suncoast TC, Amsoil Full SAPS (EFM) 5w40, Amsoil ATF, 7" touchscreen Android powered stereo (direct from China) w/ 4G LTE mobile data for streaming Netflix, HBO GO, Slingbox, Pandora, etc.

I'd prefer it if my limited trim were black. Maybe I'll do something about that if I decide to go with the double din kit

Sent from my Lumia 900 using Tapatalk