Lift Ride Quality

LKWJeeper · **Posted:** Fri Jan 24, 2014 10:33 am

The OME lift by JBA. Its now listed on his website for $884.00 was there a price increase?

tommudd · **Posted:** Fri Jan 24, 2014 11:39 am

JeeperSC wrote:

The OME lift by JBA. Its now listed on his website for $884.00 was there a price increase?

Yes OME done away with the one line of shocks they had for a long time to the newer versions and in turn raised the prices across the boards for their lifts

LKWJeeper · **Posted:** Fri Jan 24, 2014 11:45 am

Good to know.. Thanks Tom!

Gageraid · **Posted:** Fri Jan 24, 2014 11:47 am

tommudd wrote:

JeeperSC wrote:

The OME lift by JBA. Its now listed on his website for $884.00 was there a price increase?

Yes OME done away with the one line of shocks they had for a long time to the newer versions and in turn raised the prices across the boards for their lifts

This means you have to go ALL THE WAY BACK to every single post about OME and change the prices in posts. :ROTFL:

Any more information about the new shocks?

Bmxer524 · **Posted:** Fri Jan 24, 2014 11:50 am

Gageraid wrote:

Any more information about the new shocks?

Of course. They're more expensive :jester:

tommudd · **Posted:** Fri Jan 24, 2014 12:09 pm

Bmxer524 wrote:

Gageraid wrote:

Any more information about the new shocks?

Of course. They're more expensive :jester:

There has to be one in every crowd :ROTFL:

The newer ones are suppose to be better with less fade over long periods of offroading etc.
Well even on uneven street surfaces , shocks heat up and these new ones are suppose to dissipate heat better, last longer , ride even better . We'll see how they do.
So yes spread the word far and wide
"OME PRICES WENT UP...OME PRICES WENT UP !!!!!!"

:mrgreen:

Gageraid · **Posted:** Fri Jan 24, 2014 12:53 pm

Let us know when you test them yourself, Tom.

Bmxer524 · **Posted:** Fri Jan 24, 2014 2:43 pm

Well I didn't lie, Tom lol

As for him testing them, I'm sure he'll find someone. I can't see him lowering the KJ...

12KK SFD · **Posted:** Tue Mar 04, 2014 4:43 pm

Are the following parts the correct set up?

Front- 3.7LHD 150lb-GVW 1) OME2927 Springs 2) 90009 Strut
Rear- Gas/Diesel-Med 1) OME2731 Springs 2) N132L Shocks

tommudd · **Posted:** Tue Mar 04, 2014 4:54 pm

12KK SFD wrote:

Are the following parts the correct set up?

Front- 3.7LHD 150lb-GVW 1) OME2927 Springs 2) 90009 Strut
Rear- Gas/Diesel-Med 1) OME2731 Springs 2) N132L Shocks

Looks like it

OK back up a little bit
I haven't updated all of my info since they changed over
Looks like the rear shocks are Nitrocharger Sport 60069
the N132Ls are the old number of course

But fronts are 927 springs and 90009 front shocks

Bmxer524 · **Posted:** Tue Mar 04, 2014 5:00 pm

12KK SFD wrote:

Are the following parts the correct set up?

Front- 3.7LHD 150lb-GVW 1) OME2927 Springs 2) 90009 Strut
Rear- Gas/Diesel-Med 1) OME2731 Springs 2) N132L Shocks

Yep, don't forget bumpstops.

12KK SFD · **Posted:** Tue Mar 04, 2014 5:00 pm

Excellent, thanks. One step closed to pulling the trigger.

tommudd · **Posted:** Tue Mar 04, 2014 5:02 pm

12KK SFD wrote:

Excellent, thanks. One step closed to pulling the trigger.

See my addendum above on the rear shocks
I'm going to make sure those are the same length as the old 132Ls

12KK SFD · **Posted:** Tue Mar 04, 2014 5:04 pm

Bmxer- I actually did forget those at the moment... long day. But I will get them.

Thanks, tom.

12KK SFD · **Posted:** Wed Mar 05, 2014 11:30 am

JeepMonkey has some parts available, specifically the IronMan Rear Shocks (12712LGR) and a set of OME Rear Springs (OME273-1).

Would I be able to run this as a combination in the rear? I'd then look for a front setup. Still only look for 1.5" to 2" of lift.

tommudd · **Posted:** Wed Mar 05, 2014 1:00 pm

12KK SFD wrote:

JeepMonkey has some parts available, specifically the IronMan Rear Shocks (12712LGR) and a set of OME Rear Springs (OME273-1).

Would I be able to run this as a combination in the rear? I'd then look for a front setup. Still only look for 1.5" to 2" of lift.

The latest Ironman shocks are ready for 3-4 inchhes of lift so would be ok ,.....so yes
still waiting on updated specs on the new OMEs

12KK SFD · **Posted:** Wed Mar 05, 2014 1:35 pm

Great, thanks tom.

I'm drawing a blank here... I need bump stops for both the front and rear, right?

Bmxer524 · **Posted:** Wed Mar 05, 2014 2:32 pm

Yes. Teraflex front and use 2 hockey pucks per side in the rear.

12KK SFD · **Posted:** Wed Mar 05, 2014 3:00 pm

Thanks!

Erikg84 · **Posted:** Wed Mar 05, 2014 4:57 pm

Any ideas where to get hockey pucks? My search has been more difficult than I imagined. I've tried the big box chain stores, as well as some local sporting goods shops... I was hoping to get them from a physical store, but as a last chance I can order some online through Amazon or something.

Lift Ride Quality

Who is online