Anybody Have Instructions on how to change the rear main seal

I don't have all the details but you are going to have to drop the transmission and there are some pointers at http://www.greendieselengineering.com/f ... st/37.page . The 05 and 06 FSMs can be downloaded from the link on Sir Sam's NOOB guide and provide details on removal/install of the seal.

While in there I'd recommend you consider installing a Euro torque converter and possible the new style transmission pump assembly just because you are already in that far anyway

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Here is the thread about my main rear seal replacement. Not a complete direction set, but it shows some difficulties I had.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=73745

I had oil on the ground under my jeep, and you can see form the pictures lots of oil on the underside too.

_________________
Phil
2005 131k 3.7 Gasser (Lifted-CRD Springs, 4.10 Gears, F+R DTT, Teraflex 2wd Low, Skidrow/Mopar Skids, Rock Lizard Super Skinks, Goodyear Wrangler Authority 31x10.5-15)
2012 Triumph Tiger (TKC 80 Front Tire Heidnau K60 Rear, Crash Bars, Skid Plate, Bark Busters, Pelican Case Top Box)