I was wanting to check the condition of my rocker arms and am wondering if my Scangauge will be able to read MAF sensor. I already know it reads the MAP but can't seem to find MAF. Anyone else have this problem?

_________________
2006 Liberty CRD 275K, JBA 2.5 with Fox Shocks, GDE Turbo Kit, GDE TCM Tune, Suncoast TC, OEM fuel filter housing converted to fit Caterpillar Fuel Filter 1R-0749, OEM themostat housing modified to accept Hemi 203 F thermostat.

I had / have a Scangauge II from the early days - I will not connect it to the KJ again.
I imagine it would only read what you want as an X gauge if it indeed will.
Good luck.

Has anyone tried TouchScan or SoftScan or a similar software product that is used with a Laptop computer to read or monitor real time data PIDs including the MAF values?
Is the MPPS interface cable (dongle) between the OBDII port and the Laptop USB capable of reading all of the sensor data using one of these softwares or similar product?

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve