Plasti dip question

MichiganMan · **Joined:** Wed Oct 30, 2013 4:57 pm **Posts:** 8

I am looking at doing some plasti dip on my wheels and hood . Is it okay to do the spray can kind or will that not work ?

Sent from my SCH-I535 using Tapatalk

LKWJeeper · **Posted:** Sat Mar 22, 2014 8:01 pm

Yup just get a few cans and go to town!

Sent from my LG-D801 using Tapatalk

MichiganMan · **Joined:** Wed Oct 30, 2013 4:57 pm **Posts:** 8

Great thanks for the reply

Sent from my SCH-I535 using Tapatalk

LKWJeeper · **Posted:** Sun Mar 23, 2014 10:15 am

Don't worry about messing up the more you use the easier it peels off.

Sent from my LG-D801 using Tapatalk

Vards · **Joined:** Thu Oct 13, 2011 6:18 pm **Posts:** 39

Go with 1/2 can per wheel if just covering brakes and spraying while on, 1 can per wheel if spraying whole wheel in detail. Aim for 7 thin coats you shouldnt have full cover until about coat number 3.

Vards · **Joined:** Thu Oct 13, 2011 6:18 pm **Posts:** 39

Remember if doing hood and you need to pull tape, you must pull while its wet or you'll strip the bit you want to stay on

Plasti dip question

Who is online