Help pulling engine

jthomas999 · **Joined:** Mon Jan 16, 2012 11:51 pm **Posts:** 98

2006 CRD, trying to get the engine pulled.

In the shop manual, after pulling the starter, it says to removew the engine to transmission collar and has a picture.

I don't see a engine to transmission collar. I have removed the bottom 4 bolts on the trans housing, 2 facing forward and 2 facing rear.

How do I get to the flexplate/torque convertor bolts?

Thanks in advance,

John

jthomas999 · **Joined:** Mon Jan 16, 2012 11:51 pm **Posts:** 98

I found it. There is a rubber plug above where the start is to gain access.

Help pulling engine

Who is online