What have you done to your KK lately

Ted15 · **Posted:** Sat May 03, 2014 10:50 am

carlosburitica wrote:

built a stronger trackbar.
made out of 1 1/2" 1/4 think DOM tubing.

No

Sweet, where'd you get the parts from?

TIJKK1220 · **Posted:** Sat May 03, 2014 4:40 pm

Just had all these lights come on. Thoughts?

Sent from my HTC One using Tapatalk

dcbelcher26 · **Posted:** Sat May 03, 2014 5:00 pm

TIJKK1220 wrote:

Just had all these lights come on. Thoughts?

Sent from my HTC One using Tapatalk

mine did that before!!! All i did was restart it and everything went away

Sent from my iPhone using Tapatalk

At The Helm · **Posted:** Sat May 03, 2014 5:07 pm

I'd check the harnesses for the wheel speed sensors and abs first.

cherox · **Joined:** Sat Oct 12, 2013 6:09 pm **Posts:** 55

Installed my Dynomax catback exhaust last night.. Here is a sound clip. Its a touch louder than I was hoping for, but its not obnoxiously loud. Enjoy!

https://www.youtube.com/watch?v=CSWs8dqvZmc

ajohns1288 · **Posted:** Sat May 03, 2014 10:49 pm

TIJKK1220 wrote:

Just had all these lights come on. Thoughts?

Sent from my HTC One using Tapatalk

I had the same thing happen due to a bad speed sensor. You can either have the dealer (or shop with a starscan) pull the codes, or if you have one of those Bluetooth OBD II dongles you can do it yourself.

TIJKK1220 · **Posted:** Sat May 03, 2014 11:10 pm

I have a Bluetooth but it didn't find a code. Also all the lights are off again. I'm not entirely sure what happened

I know that I put quite a bit of strain on the brake lock traction control coming out of a turn just before the lights turned on. I gunned it out of a sharp turn and it locked up the rear end to stop me from spinning the tires lol

In other news I'm reading roughly +10ish horsepower right now from my torque app when attached to the Kk with the new throttle body and my 0-60 has been cut from 10.4 to 9.5 on flat ground I don't have a scanguage(sorry gage) to check my mpg's or anything like that but it still doesn't feel any quicker

Sent from my HTC One using Tapatalk

Gageraid · **Posted:** Sun May 04, 2014 12:11 am

TIJKK1220 wrote:

I have a Bluetooth but it didn't find a code. Also all the lights are off again. I'm not entirely sure what happened

I know that I put quite a bit of strain on the brake lock traction control coming out of a turn just before the lights turned on. I gunned it out of a sharp turn and it locked up the rear end to stop me from spinning the tires lol

In other news I'm reading roughly +10ish horsepower right now from my torque app when attached to the Kk with the new throttle body and my 0-60 has been cut from 10.4 to 9.5 on flat ground I don't have a scanguage(sorry gage) to check my mpg's or anything like that but it still doesn't feel any quicker

Sent from my HTC One using Tapatalk

I'm gonna take this all with a grain of salt since it's not with a scangauge. It would be awesome if mileage improves.

carlosburitica · **Joined:** Sat Jan 05, 2013 1:07 pm **Posts:** 309

silverkk wrote:

ok so as well I'm painting my lift green lol but I have a lot of green shot so it will work and got sway bar quick discos for. 1/3 the price of jbas needed minor mod to them

those are the noisiest disconnects you can buy.... i better to find disconnects that do it in one side only and thought the bolt like this

m80jeep · **Posted:** Sun May 04, 2014 9:10 am

New shoes. Got a set of tj rubicons that needed to be cleaned up a little. Had to spray them with duplicolor wheel paint because of all of the scratches. Definately changed the stance of the jeep.

knightenforcer · **Posted:** Sun May 04, 2014 10:26 am

cherox wrote:

Installed my Dynomax catback exhaust last night.. Here is a sound clip. Its a touch louder than I was hoping for, but its not obnoxiously loud. Enjoy!

https://www.youtube.com/watch?v=CSWs8dqvZmc

Congrats...I'm happy with mine.
Nice mellow rumble....

(definitely sounds alot better in person tho)

@ m80jeep, looks good did you use any spacers
or did those bolt right on?

Gageraid · **Posted:** Sun May 04, 2014 10:54 am

m80jeep wrote:

New shoes. Got a set of tj rubicons that needed to be cleaned up a little. Had to spray them with duplicolor wheel paint because of all of the scratches. Definately changed the stance of the jeep.

Very cool!

ajohns1288 · **Posted:** Sun May 04, 2014 2:02 pm

TIJKK1220 wrote:

I have a Bluetooth but it didn't find a code. Also all the lights are off again. I'm not entirely sure what happened

I know that I put quite a bit of strain on the brake lock traction control coming out of a turn just before the lights turned on. I gunned it out of a sharp turn and it locked up the rear end to stop me from spinning the tires lol

In other news I'm reading roughly +10ish horsepower right now from my torque app when attached to the Kk with the new throttle body and my 0-60 has been cut from 10.4 to 9.5 on flat ground I don't have a scanguage(sorry gage) to check my mpg's or anything like that but it still doesn't feel any quicker

Sent from my HTC One using Tapatalk

Mine always went away with a restart, only to randomly come back on until a replaced the sensor. Torque won't read ABS codes, but you can download the alOBD terminal app which lets you send raw commands to the adapter. Once you connect, just send the following commands:

Code:

AT SH 754 (sets header to ABS unit)
AT CM 000 (sets receive filter to show everything)
18 00 FF 00 (command to return all DTCs)

The response should be:

Code:

58 00 (no fault codes)
OR
58 XX AA BB CC (XX = number of faults, AABB = DTC, CC=Status; AABBCC will repeat for each code stored)

m80jeep · **Posted:** Sun May 04, 2014 2:53 pm

The wheels bolted right on. They have more of an offset, and they are wider. My tires are 225/75/16 and with those wheels they are even with the fenders now.

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

m80jeep wrote:

The wheels bolted right on. They have more of an offset, and they are wider. My tires are 225/75/16 and with those wheels they are even with the fenders now.

Where did you get them? :shock:

m80jeep · **Posted:** Sun May 04, 2014 9:08 pm

Craigslist. Traded an old revolver that I didnt want. They pop up on craigslist occasionally

Bmxer524 · **Posted:** Sun May 04, 2014 9:43 pm

knightenforcer wrote:

@ m80jeep, looks good did you use any spacers
or did those bolt right on?

TJ Moabs bolt right on. They're 16x8 with 5" of backspacing. Same bolt pattern as our KKs, 5x4.5.

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

carlosburitica wrote:

silverkk wrote:

ok so as well I'm painting my lift green lol but I have a lot of green shot so it will work and got sway bar quick discos for. 1/3 the price of jbas needed minor mod to them

those are the noisiest disconnects you can buy.... i better to find disconnects that do it in one side only and thought the bolt like this

you can do those but how much are the silver ones

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

And noise doesn't bother me I could always put rubber inside

John3:17 · **Posted:** Mon May 05, 2014 6:46 am

Bmxer524 wrote:

knightenforcer wrote:

@ m80jeep, looks good did you use any spacers
or did those bolt right on?

TJ Moabs bolt right on. They're 16x8 with 5" of backspacing. Same bolt pattern as our KKs, 5x4.5.

But 225's are a narrow tire for an 8" rim

What have you done to your KK lately

Who is online