THE OHIO CHAT ROOM!!!

Ted15 · **Posted:** Sat May 17, 2014 12:12 pm

This messed up past is that I had to complain to their corporate office to have them look at it. Mistakes happen, I've made a few myself but why fight an inspection. On a downward note, the front got a little louder since the repair. I hope it's ok. I'll find out this week if I can get in for the ten day maintenance.

tommudd · **Posted:** Sat May 17, 2014 6:26 pm

Yes Bob, moving, had a meeting at the main office that ended at 2:30 then went North. packed more, loaded all I could including the dryer, got a dolly ( and Hart) for the washer.
Still another load of odds and ends in the house, then start garage. Realtor has people that want to see it BUT I'm only an old fat man, can only do so much in a weekend :-)r

Thinking of bribing Hart next weekend :ROTFL:

tommudd · **Posted:** Sun May 18, 2014 8:36 pm

Tri Link number upteen and 69 bit the dust............................... :furious:

profdlp · **Posted:** Sun May 18, 2014 9:00 pm

If at first you don't succeed, Tri Link Tri Link again. :jester:

(OK, I know it ain't funny when it happens to you.) :wink:

hucorey · **Joined:** Tue Mar 06, 2012 4:29 am **Posts:** 378

profdlp wrote:

If at first you don't succeed, Tri Link Tri Link again. :jester:

(OK, I know it ain't funny when it happens to you.) :wink:

tommudd · **Posted:** Mon May 19, 2014 8:38 am

Just need to find a good fabrication shop and have them make what I want.
You could use the bushings/ ball joint that you would use for the stock tri-link. Now instead of having it being a "flat" design it would come half way and drop down 3 inches. Could sell a ton of them, anyone hearing me and wanting to make one just send me 25 bucks for each one you sell for the idea. :wink:

TwoBobsKJ · **Joined:** Fri May 11, 2012 8:03 pm **Posts:** 463

tommudd wrote:

Tri Link number upteen and 69 bit the dust............................... :furious:

Sorry to hear that, Tom. Mine has all the symptoms of going bye-bye also - not really in the mood to spend money on the tri link. Had other designs for that money

When somebody fabs up a workable version put me in line to buy one.

Bob

tommudd · **Posted:** Mon May 19, 2014 11:40 am

TwoBobsKJ wrote:

tommudd wrote:

Tri Link number upteen and 69 bit the dust............................... :furious:

Sorry to hear that, Tom. Mine has all the symptoms of going bye-bye also - not really in the mood to spend money on the tri link. Had other designs for that money

When somebody fabs up a workable version put me in line to buy one.

Bob

I'm calling around here on noon hour to see what I can find in some race car/ custom car shops . Wouldn't be hard to make either sheet metal or tubing would work. If I can find someone to make one, I'll have them make 5 or 6 to sell as well. Once they have the initial pattern made shouldn't be too bad. Even if its as much as a Mopar tri-link, in the end it will be cheaper since it will be made strong enough to change out bushings/ will last forever almost or should. Now we'll see who reads this and runs with it before I get a chance to :banghead:

John3:17 · **Posted:** Mon May 19, 2014 12:00 pm

tommudd wrote:

TwoBobsKJ wrote:

tommudd wrote:

Tri Link number upteen and 69 bit the dust............................... :furious:

Sorry to hear that, Tom. Mine has all the symptoms of going bye-bye also - not really in the mood to spend money on the tri link. Had other designs for that money

When somebody fabs up a workable version put me in line to buy one.

Bob

I'm calling around here on noon hour to see what I can find in some race car/ custom car shops . Wouldn't be hard to make either sheet metal or tubing would work. If I can find someone to make one, I'll have them make 5 or 6 to sell as well. Once they have the initial pattern made shouldn't be too bad. Even if its as much as a Mopar tri-link, in the end it will be cheaper since it will be made strong enough to change out bushings/ will last forever almost or should. Now we'll see who reads this and runs with it before I get a chance to :banghead:

I wouldn't worry about it, most will only make a couple and quit. They'll get tired of dealing with the public or move on to another vehicle. Stick with your ideas!

tommudd · **Posted:** Tue May 20, 2014 6:32 pm

So heres a little story to get you laughing......................
Been moving of course, didn't get everything I wanted moved on Saturday so slept a while and took off at 4 AM Sunday to run to Swanton. Get up there load etc, head for the Home Place and a party for my Aunt. Finally about 7:30-8:00 PM I get home after 600 plus miles and being up for a while.
Pull in the driveway and see grass and think the neighbor must of mowed......
later went to check for mail and there is a note in the door, from......Chris' Lawn Service, I think WTH???? Look and yes someone has mowed my yard! I'm thinking why would someone from a lawn service come mow my yard without asking if I even want then to :furious:

!
Keep thinking about it and wondering how much this is going to cost
About 11 I look at the note again still :furious:

and then think, wait this looks like Chris (03CDKJs) handwriting :banghead:

Took a while but figured it out finally who the :furious:

mowed the grass :ROTFL:

hucorey · **Joined:** Tue Mar 06, 2012 4:29 am **Posts:** 378

Lol. That's funny.

I'm here for ya buddy. If you want to bring your idea up to my shop we can Fab up anything and go from there.

tommudd · **Posted:** Tue May 20, 2014 10:26 pm

hucorey wrote:

Lol. That's funny.

I'm here for ya buddy. If you want to bring your idea up to my shop we can Fab up anything and go from there.

Cool, I'll get some details together and send ya !! :pepper:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Did someone say FAB work?!?!?!?!
Ok me awake now :SOMBRERO:

Tom buy me my Millermatic and I'll fab anything ya want for free :pepper:

BUT the good news, I did get that old Lincoln up and running :shock:

She runs relatively smooth too! Amazing from a seized up chicken coop welder that hadnt seen daylight in 20 or so years to a decent buzz box! Chris ya have any red paint left? :ROTFL:

Ok enough time wasted, gotta go get my rototiller and get busy!!!!!!
:BANANA:

hucorey · **Joined:** Tue Mar 06, 2012 4:29 am **Posts:** 378

tommudd wrote:

hucorey wrote:

Lol. That's funny.

I'm here for ya buddy. If you want to bring your idea up to my shop we can Fab up anything and go from there.

Cool, I'll get some details together and send ya !! :pepper:

Sounds great!!8-)

tommudd · **Posted:** Thu May 22, 2014 4:22 pm

Anyone have big plans for the Holiday weekend?
well more interesting / fun then driving back and forth between Northwest and Central Ohio..... :banghead:

fun fun fun
be great to make a one trip do it all, done...........

KJWildman · **Posted:** Thu May 22, 2014 8:30 pm

I get the weekend off!! WOOHOO!!!!! Tom, give me a call if you're up here.

Sent from my Z796C using Tapatalk

tommudd · **Posted:** Fri May 23, 2014 12:20 am

KJWildman wrote:

I get the weekend off!! WOOHOO!!!!! Tom, give me a call if you're up here.

Sent from my Z796C using Tapatalk

I'll be back and forth all weekend Larry, have to be,
Realtor is pi**ed off that I'm taking so long to get out since she has people waiting to see the place, but ...............
So come get your stuff! :wink:

tommudd · **Posted:** Fri May 23, 2014 12:23 am

teckman02 wrote:

tommudd wrote:

Moving to Gahanna area .............
good or bad who knows but here I go

My wife will love this, Easton Town Center less than 2 miles away ............. :roll:

sweet so when is the M&G BBQ at the new pad

Never, after recent events I've gave those up, moving on

Megalos · **Posted:** Fri May 23, 2014 8:13 am

Update: waiting on MRI results/diagnosis from doc on how my back is jacked up. I want this fixed so I can help Tom with his next move, make sure Chris is mowing the lawn in straight lines, hide 501s geocaches, teach the Ohio deer about Wildman, and punch Hart in the gut.

tommudd · **Posted:** Fri May 23, 2014 12:51 pm

Megalos wrote:

Update: waiting on MRI results/diagnosis from doc on how my back is jacked up. I want this fixed so I can help Tom with his next move, make sure Chris is mowing the lawn in straight lines, hide 501s geocaches, teach the Ohio deer about Wildman, and punch Hart in the gut.

Hopefully you get it figured out! I've had to go into the chiropractor last two days due to messing my back up getting the washer in. My fault in a way, had it laid back enough to get over that top step up into the house, some water spilled out on the tile floor and I slipped in it, down I went, dolly and washer on top of me :banghead:

Its one of those front loaders with the drawers underneath so taller than normal washer . No feeling in my left arm the next day, but getting some of it back today. Oh well I'm sure by the time the weekend is done there will be more bangs/ bruises and OH S***'s :ROTFL:

So get well Megalos!!!If nothing else so you can come over and sit on the back deck and drink some cold ones !!

Thanks for the offer of coming over to help me move John, much appreciated ! Wish you were closer could use the help for sure :wink:

You're just about 5-6 hours too far away, need to get you over this way !! :ROTFL:

THE OHIO CHAT ROOM!!!

Who is online