It is currently Thu Nov 05, 2026 11:15 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 26 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: High pitch noise
PostPosted: Sat Jun 28, 2014 12:45 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 06, 2007 9:51 pm
Posts: 6302
Location: Somewhere between Heaven and Hell... But it is really hot here on Earth...
So is it safe to say that the noise you were hearing was just normal turbo noises - just louder because of the failed inlet hose?

That inlet hose is a VERY common problem for anyone that has the CCV still connected up, the rubber just melts away from the oil contamination.

I wish we could source a silicone replacement from Samco for that, but I don't know anyone that does prototyping to get that made up.

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 225 CRDs currently driving with my valves, timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.


Top
 Profile  
 
 Post subject: Re: High pitch noise
PostPosted: Sun Jun 29, 2014 8:29 am 
Offline
LOST Newbie
User avatar

Joined: Thu Aug 15, 2013 10:04 am
Posts: 86
Location: Boston
In a strange turn of events Weeks was correct. I replaced the turbo inlet hose and noise was still there... I then went through each hose, clamp, etc. Found the nuts to the intake adapter were a little loose. tightened them up and BOOM noise is gone.

I'm actually glad that noise was there as it led to the discovery of the severed hose and confirmed my turbo is in good shape.

Thanks everyone!!!

weeks101 wrote:
Sounds like a boost leak.

Did the dealer remove the intake elbow to service your rack? If so did they reinstall it correctly? Did they use a new gasket?

Start by checking the 4 nuts that secure the adapter and make sure they are tight. Also check the 2 hose clamps.


_________________
sold...05 CRD Limited, GDE Hot Tune, Euro TC, ARP Head Studs, Intake Elbow Kit, Samco CAC Hoses, Etecno 7v glow plugs, OME 790 and Bilstein 916 up front, OME 948 and OME N132L rear, JBA Upper A-Arms, 245/75/16 Duratracs on Moabs, Renegade roof lights, Curt Front Hitch, BTF Kryptonite Diff Cover, JCR Stage 2 Rock Rails, Skid Row Skid Plates


Top
 Profile  
 
 Post subject: Re: High pitch noise
PostPosted: Sun Jun 29, 2014 10:12 am 
Offline
LOST Addict

Joined: Fri Apr 02, 2010 3:14 pm
Posts: 2294
Location: Sumter, SC
I wonder why there was no underboost cel... Maybe because the air to turbo was also shot, sucking air from outside the filter and MAF measured less air ? I thought underboost is triggered by map and acceleration.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.


Top
 Profile  
 
 Post subject: Re: High pitch noise
PostPosted: Sun Jun 29, 2014 10:27 am 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 747
Glad you found it!

_________________
SasquatchParts.com

Supporting Vendor

Jeep Liberty 2.8L CRD
Chevy Colorado/GMC Canyon 2.8L Duramax


Top
 Profile  
 
 Post subject: Re: High pitch noise
PostPosted: Sun Jun 29, 2014 12:49 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7461
Location: Central GA
Make the dealer give you one!!!!
They broke it somehow while changing out the steering rack since it was not making the noise before they touched it and afterwards it was. :furious:
They are responsible!
Don't except any excuses,

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: High pitch noise
PostPosted: Mon Jun 30, 2014 7:15 pm 
Offline
LOST Addict

Joined: Fri Apr 02, 2010 3:14 pm
Posts: 2294
Location: Sumter, SC
For 50some bucks, it's not worth the wasted time arguing with some Loco dealer imo

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 26 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com