What have you done to your KK lately

TIJKK1220 · **Posted:** Sun Jul 20, 2014 7:52 pm

Gave the jeep a bath today and took some photos of the dent I put in the bumper

Clean

Without that bumper my jeep would have been a scrap heap... I cannot say enough good things about this bumper. Morgan you're the man!

At The Helm · **Posted:** Sun Jul 20, 2014 8:11 pm

Holy smokes! How did that happen?

TIJKK1220 · **Posted:** Sun Jul 20, 2014 8:16 pm

Little to much skinny pedal lol!
I made it up the hill though!

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

TIJKK1220 wrote:

I did something today I never expected to do while off-roading today... Morgan. I managed to bend your bumper XD I say "bumper" very loosely the front skid that protects the radiator did it's job today.

Used a little(ok a lot) to much skinny pedal to get out of an obstacle and slammed really hard into a ball of roots and mud. Bent the plate slightly but if it hadn't been there my jeep would have been on a flatbed truck and probably totaled. Instead I Went through it twice

your products are great! Keep up the amazing work!

Due that was awesome too!! HONK! hahaha, but suck for the guy with the RockLizard bumper. His whole radiator area was crushed bad. Maybe RL needs to improve their design a bit.......just saying

Sent with the power of children's screams!!!

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

living the new mount for the 50 inch bar

and then this happened

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

Loving *

JeepGirl96 · **Joined:** Mon Mar 11, 2013 1:39 pm **Posts:** 26

Installed these new headlights

Also added some sliders....well that was like a couple weeks ago lol

(on a side note, Ive been considering tinting the side markers/blinkers since they kinda stand out and dont really fit in lol...has anyone done that before and if so what did you do/use?....another question, I've been looking for a roof rack/basket, what all do you have? I would like something more on the cheap side)

At The Helm · **Posted:** Mon Jul 21, 2014 11:36 am

JeepGirl96 wrote:

Installed these new headlights

(on a side note, Ive been considering tinting the side markers since they kinda stand out and dont really fit in lol...has anyone done that before and if so what did you do/use?

VHT Niteshades and clear coat. I think I did two wet coats of VHT, then four or five coats of clear. Wetsanded and buffed

JeepGirl96 · **Joined:** Mon Mar 11, 2013 1:39 pm **Posts:** 26

Thak you!!! I'll try that out

lfhoward · **Posted:** Mon Jul 21, 2014 3:48 pm

Rola roof baskets are good quality and low profile, without being super expensive. That's what I am running.

I got mine used, but I think JBA sells them now.

JeepGirl96 · **Joined:** Mon Mar 11, 2013 1:39 pm **Posts:** 26

lfhoward wrote:

Rola roof baskets are good quality and low profile, without being super expensive. That's what I am running.

I got mine used, but I think JBA sells them now.

Sweet!! I'll check them out

JeepMonkey190 · **Posted:** Tue Jul 22, 2014 3:02 am

Atthehelm wrote:

JeepGirl96 wrote:

Installed these new headlights

(on a side note, Ive been considering tinting the side markers since they kinda stand out and dont really fit in lol...has anyone done that before and if so what did you do/use?

VHT Niteshades and clear coat. I think I did two wet coats of VHT, then four or five coats of clear. Wetsanded and buffed

Or there is this method too if your interested in this way I used the same method as everyone is using for the headlights but I know someone did this after me using a dremel with the cutting wheel attachment.

TIJKK1220 · **Posted:** Tue Jul 22, 2014 5:02 am

That would be me

it didn't Work out so well for me with the dremel I get a bit of fogging.

I think with a little more patience that It could have turned out alright

JeepGirl96 · **Joined:** Mon Mar 11, 2013 1:39 pm **Posts:** 26

That would be my preferred way but I dont trust myself lol

(which is the reason why I bought the lights instead of doing them myself)

pwdrskier · **Posted:** Tue Jul 22, 2014 2:51 pm

Lift
Bed lined the grill
Jk bumper light bar mod
235/70/16 general grabber at2

dcbelcher26 · **Posted:** Tue Jul 22, 2014 5:05 pm

pwdrskier wrote:

Lift
Bed lined the grill
Jk bumper light bar mod
235/70/16 general grabber at2

how do you like those tires?

Sent from my iPhone using Tapatalk

dcbelcher26 · **Posted:** Tue Jul 22, 2014 9:39 pm

Hey when taking doors off, is it better to take the hinge off with the door or take the door off the hinge

Sent from my iPhone using Tapatalk

JeepMonkey190 · **Posted:** Tue Jul 22, 2014 10:43 pm

silverkk wrote:

living the new mount for the 50 inch bar

and then this happened

Im digging the dashboard bezels I thought about doing the same color but I have wrong color scheme :banghead:

and how does the bracket and the weather strip like each other water-proof wise?

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

No problems what so ever fully sealed and thanks

12KK SFD · **Posted:** Wed Jul 23, 2014 7:41 am

I'm dropping it off today to have the clock issue fixed as well as an oil change.

What have you done to your KK lately

Who is online