What have you done to your KK lately

LKWJeeper · **Posted:** Wed Jul 23, 2014 2:47 pm

I noticed Rock Lizard is going to stop supporting the KK? Congratulations Morgan!

pwdrskier · **Posted:** Thu Jul 24, 2014 12:14 am

dcbelcher26 wrote:

pwdrskier wrote:

Lift
Bed lined the grill
Jk bumper light bar mod
235/70/16 general grabber at2

how do you like those tires?

Sent from my iPhone using Tapatalk

I like them a lot. They are awesome in the snow and on the beach.

Bmxer524 · **Posted:** Thu Jul 24, 2014 1:01 pm

I rotated my tires the other day. Also noticed my rear axle is leaking :banghead:

Guess I'll be doing an axle seal either this weekend or possibly next.

pwdrskier · **Posted:** Thu Jul 24, 2014 4:48 pm

Mounted my GPS in the pocket on the dash. And ran the wire behind the dash and taped into the 12v plug.

LKWJeeper · **Posted:** Thu Jul 24, 2014 5:54 pm

Going to be purchasing something big for the KK this weekend......

TIJKK1220 · **Posted:** Thu Jul 24, 2014 7:15 pm

I'm adding a new addition to my jeep tomorrow

meeting up with another member to install.

LKWJeeper · **Posted:** Thu Jul 24, 2014 8:14 pm

TIJKK1220 wrote:

I'm adding a new addition to my jeep tomorrow

meeting up with another member to install.

I hope it's sliders

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

Anyone with the winch bumper...Please help me.
I am going to paint the bumper.
What paint should I use?

Thank you.

Bmxer524 · **Posted:** Thu Jul 24, 2014 10:17 pm

TIJKK1220 wrote:

I'm adding a new addition to my jeep tomorrow

meeting up with another member to install.

Better be sliders! LKW, gonna give us some hints?

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

Seems like everyone is spending a little bit of money! :BANANA:

I myself have even spent some too, just waiting for them to arrive!

Gageraid · **Posted:** Thu Jul 24, 2014 10:29 pm

Since we're all sharing our secrets here, as soon as my money clears in my paypal account I'm ordering the 4.7L throttle body from a forum member.

At The Helm · **Posted:** Thu Jul 24, 2014 10:40 pm

lammarco wrote:

Anyone with the winch bumper...Please help me.
I am going to paint the bumper.
What paint should I use?

Thank you.

Your options are wide open. Whatever your decide to use, make sure you clean and prep well. A phosphoric acid treatment will etch the metal and help keep rust at bay. I just sprayed my old plate bumper with por-15, it takes forever to dry but seems to be a really tough coating. It does require a uv resistant top coat though like their chassis black. Another member on here will have to tell me how it holds up.. :wink:

I also just painted my tube bumper with Rustoleum's hammered black. It isn't actually black, more of a dark gloss grey but looks awesome against the brilliant black factory color imo.
Krylon satin black looks good for a while but in my experience it fades rather quick.

JeepMonkey190 · **Posted:** Fri Jul 25, 2014 1:19 am

nFodzy wrote:

Seems like everyone is spending a little bit of money! :BANANA:

I myself have even spent some too, just waiting for them to arrive!

Should be any day now :rockon:

TIJKK1220 · **Posted:** Fri Jul 25, 2014 4:05 am

lammarco wrote:

Anyone with the winch bumper...Please help me.
I am going to paint the bumper.
What paint should I use?

Thank you.

I used rustolium hammered black with an self etching primer coat looks great and covered well. Even with all the mishaps I had

LKW, my spend wasn't sliders though I wish it was

I'll have pictures sooon enough.

On the slider topic I may be working with yet another forum member on a design for those as well!

LKWJeeper · **Posted:** Fri Jul 25, 2014 6:02 am

Bmxer524 wrote:

TIJKK1220 wrote:

I'm adding a new addition to my jeep tomorrow

meeting up with another member to install.

Better be sliders! LKW, gonna give us some hints?

Once i actually buy it I'll give it away.. But I'm going to join a certain club.

12KK SFD · **Posted:** Fri Jul 25, 2014 7:52 am

I swear my KK leaks gas by how much the needle drops any given day...

I also feel like I hear a shock or something rattling in the back. That could just be wishful thinking so I can order a lift sooner than later. :lol:

Gilcano · **Posted:** Sat Jul 26, 2014 8:23 pm

JeepMonkey190 wrote:

nFodzy wrote:

Looks killer Tex!

Someone needs to mass produce those tire carriers in addition to ATH's rear bumper. I'd seriously kill to have that set up.

I am willing to make them for ATH bumper owners as a bolt on or weld on if your interested. It's in my build thread
I started thinking about this idea last night about selling spare tire carriers to any thing that is wanted like add ons or center (ex. Jerry cans, high lifts, rack, center tire driver or passenger, even weld on or bolt on options) if you guys are interested just let me know and I will start working up numbers and options.

Thanks guys

Here's mine pretty much finished just missing the spare lol and the cap that goes over the bearings, and I promise I will put up more photos tomorrow

Here's the link to my build thread
viewtopic.php?f=88&t=78545&start=40

And I went with the passenger side to try to help with the leaning but I will do driver side too

That's great. Just order ATH rear bumper so it will be great to have a tire carrier. Do you have an idea of how much it will cost?
Thanks
8-)

TIJKK1220 · **Posted:** Sat Jul 26, 2014 11:22 pm

Guess who got their rear bumper

Also a great picture I snapped at hidden falls today.

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

Looks nice, very jealous!

What are those things near the middle though?

Gageraid · **Posted:** Sat Jul 26, 2014 11:49 pm

Awesome pictures. Playing nicely with the Wrangler and FJ?

What have you done to your KK lately

Who is online