lammarco wrote:
WhiteRider wrote:
lammarco wrote:
Everything is installed...Just need to run the wires and power them up...

Time to work on rear bumper...

Lammarco, Did you relocate the solenoid on your winch?
I'm considering moving it from my winch into the passenger side of the engine bay. LOTS of space in there! Wondering if you have a link for a little info about what I can and can't do?
I have cold air intake so I don't have the air box inside the engine bay. I just screw it in the metal...and call it for the day...I will make an extension remote soon so I don't need to open the hood for the control remote. I will take more pictures soon as I am going away tomorrow.

I did the exact same thing a while ago. Ran the solinoid into the engine compartment and mounted it to the side of the shield for the CAI. I also ran the solinoid key to the cubby to the right side of the steering column so I can plug the controller and not have to mess with the hood. Finally, I wired two switches on my switch bank with winch power and winch in/out so I could control the winch via switch inside the cab, or via the remot via outside the cab. Here are a few pictures:
Where I mounted the solinoid box. I still want to water proof everything, but am extremely happy with the placement and getting the solinoid out of the elements.

Here is the "key" as I call it. What you plug the controller into)



That picture is kinda old, I have since added a 42" LED light bar to the roof rack
I would be happy to give anyone more information here or privately, or more pictures if anyone wants.