What have you done to your KK lately

dcbelcher26 · **Posted:** Tue Dec 16, 2014 8:28 pm

lammarco wrote:

Finally got the 3" air intake tube and replaced the old org. plastic tube with the 4.7 TB. I must say it sucks...but this time, it sucks AIR! The jeep feel a lot more faster with my HEAVRY modications (410lb added to the truck)...

Thanks Gage for the information.

I wish I can get the hypertech but oh well...Jet chip is working fine...

Can you combine hypertech and jet chips? Looks good, i just upgraded the stock hose with a 3in flex line to the stock box for the 4.7

Sent from my iPhone using Tapatalk

Gageraid · **Posted:** Tue Dec 16, 2014 9:40 pm

Glad I could help someone out. :frankie:

JeepMonkey190 · **Posted:** Tue Dec 16, 2014 9:57 pm

dcbelcher26 wrote:

lammarco wrote:

Finally got the 3" air intake tube and replaced the old org. plastic tube with the 4.7 TB. I must say it sucks...but this time, it sucks AIR! The jeep feel a lot more faster with my HEAVRY modications (410lb added to the truck)...

Thanks Gage for the information.

I wish I can get the hypertech but oh well...Jet chip is working fine...

Can you combine hypertech and jet chips? Looks good, i just upgraded the stock hose with a 3in flex line to the stock box for the 4.7

Sent from my iPhone using Tapatalk

I don't think you can combine them but it would be a little silly because one will probably ly just over write the other anyways

TIJKK1220 · **Posted:** Tue Dec 16, 2014 10:13 pm

Where did you find your tube? How much did it cost ya?

tommudd · **Posted:** Tue Dec 16, 2014 10:14 pm

Nice HOT air sucker for sure

CorporeSano · **Joined:** Sun Oct 19, 2014 2:36 pm **Posts:** 75

Installed a Quad Band Mobile Ham with NMO mount in roof.
LCS880 Radio
Browning NMO Cable and Mount
Tram Dual Band Antenna
With a Phillips Screwdriver and Pen Magnet as a temp antenna!

CorporeSano · **Joined:** Sun Oct 19, 2014 2:36 pm **Posts:** 75

AND built some new subwoofer boxes for the girl and I

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

lammarco wrote:

Finally got the 3" air intake tube and replaced the old org. plastic tube with the 4.7 TB. I must say it sucks...but this time, it sucks AIR! The jeep feel a lot more faster with my HEAVRY modications (410lb added to the truck)...

Thanks Gage for the information.

I wish I can get the hypertech but oh well...Jet chip is working fine...

Did you notice anything from the JET chip?

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

tommudd wrote:

Nice HOT air sucker for sure

I know...haha...I am working on the heat shield for the intake... :rockon:

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

nFodzy wrote:

Did you notice anything from the JET chip?

The chip make the transmission shift better. Overall I like it...I mean I added like almost 500lb extra to the jeep...The MPG is not something I am hoping to improve (I got a civic :rockon:

)

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

lammarco wrote:

nFodzy wrote:

Did you notice anything from the JET chip?

The chip make the transmission shift better. Overall I like it...I mean I added like almost 500lb extra to the jeep...The MPG is not something I am hoping to improve (I got a civic :rockon:

)

Alright, I was just wondering so if I ever came across one used cheap for sale or a good idea I'd try it out. Thanks

TIJKK1220 · **Posted:** Wed Dec 17, 2014 6:04 am

I had one for a short while. When I first installed it it was an improvement but as time went on the computer relearned the old tune

12KK SFD · **Posted:** Wed Dec 17, 2014 8:42 am

dcbelcher26 wrote:

Looks good, i just upgraded the stock hose with a 3in flex line to the stock box for the 4.7

Sent from my iPhone using Tapatalk

That's what I'd be interested in doing. I'd prefer to keep the stock box but would benefit from any gains the 4.7 TB would provide. What did you use?

CorporeSano · **Joined:** Sun Oct 19, 2014 2:36 pm **Posts:** 75

I wish I can get the hypertech but oh well...Jet chip is working fine...[/quote]

Did you notice anything from the JET chip?[/quote]

That Engine Needs Some Detailing!

JeepMonkey190 · **Posted:** Thu Dec 18, 2014 4:33 pm

CorporeSano wrote:

I wish I can get the hypertech but oh well...Jet chip is working fine...

Same here

PALiftedKK · **Posted:** Thu Dec 18, 2014 5:05 pm

lammarco wrote:

Finally got the 3" air intake tube and replaced the old org. plastic tube with the 4.7 TB. I must say it sucks...but this time, it sucks AIR! The jeep feel a lot more faster with my HEAVRY modications (410lb added to the truck)...

Thanks Gage for the information.

I wish I can get the hypertech but oh well...Jet chip is working fine...

dude, this is an awesome build! I don't want to sound like I have a green thumb, but what's your gas mileage like? before any mods, during the chip, and chip and intake. im curious because id like to get rid of the air intake box sometime. although I took the 2 inch tube off and the engine still gets the same mileage but sounds a lot more throaty.

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

PALiftedKK wrote:

dude, this is an awesome build! I don't want to sound like I have a green thumb, but what's your gas mileage like? before any mods, during the chip, and chip and intake. im curious because id like to get rid of the air intake box sometime. although I took the 2 inch tube off and the engine still gets the same mileage but sounds a lot more throaty.

The gas miliage isn't so great since day 1 :banghead:

I got somewhere around 280-290 mile /tank before any modification, After lift installed I get 240 mile /tank. With the chip, Doesn't help that much but the jeep shift better. With the intake, It gain 1 MPG. When I got ATH bumpers on, I got 200 mile /tank. Now I upgrade the 4.7 and intake tube. I am looking at 115 half tank so far which feel so much faster with all the extra weight on my Jeep.

So I am still leanring about the Jeep gas milage now.

I will get back to you soon!

NAMoulton1 · **Joined:** Tue Aug 12, 2014 7:01 pm **Posts:** 1054

Mocked up a CB radio to see how well it'll fit above the stereo unit. I never use those vents so I won't be missing them haha.

I also crushed the tire pressure sensor light...no more annoying light on all the time!

dcbelcher26 · **Posted:** Sat Dec 20, 2014 11:01 pm

On my way home today going about 75 on the highway my whole jeep starting shaking like i had the death wobble. No loud pings or any sounds really. Then my check engine came on and starting blinking! So i pulled over turned it off, and turned it back on after i sat for a little. Check engine light gone and smooth as can be back on the road. Got home and scanned for codes and it picked up one FCM: B1935 Seems to be running normal right now but i only let it idle since i got home.

Sent from my iPhone using Tapatalk

NAMoulton1 · **Joined:** Tue Aug 12, 2014 7:01 pm **Posts:** 1054

I have no idea what that code is...google says something about it being a Front Control Module and for passenger doors lock/unlock being stuck...

What have you done to your KK lately

Who is online