It is currently Tue Nov 03, 2026 3:01 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject: OME Suspension question
PostPosted: Sat Jan 10, 2015 12:26 pm 
Offline
LOST Member
User avatar

Joined: Mon Apr 01, 2013 5:27 pm
Posts: 107
Location: Syosset, NY & Killington, VT
So I switched out the Teraflex spacer lift for OME springs and shocks. But the rear end still rides really harsh when I drive over big bumps. Does anyone know why this is?

_________________
2010 KK Liberty Renegade
Mods:
2 Hella 500 watt lights on front bumper
OME 2.5in lift
245/75r16 General Grabber at2
Cobra 75 WX ST
3ft firestik


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Sat Jan 10, 2015 1:35 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
The rear feels the same/same noises as when you had the spacer lift?
OME is a stiff ride, but I can't imagine it feeling anything like a spacer lift.
Give it time to settle, drive over some rough terrain, flex it out, and let it do it's thing and see if the problem persists.
A photo might help as well in case something is visually wrong.

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Sat Jan 10, 2015 5:42 pm 
Offline
LOST Member
User avatar

Joined: Mon Apr 01, 2013 5:27 pm
Posts: 107
Location: Syosset, NY & Killington, VT
Gageraid wrote:
The rear feels the same/same noises as when you had the spacer lift?
OME is a stiff ride, but I can't imagine it feeling anything like a spacer lift.
Give it time to settle, drive over some rough terrain, flex it out, and let it do it's thing and see if the problem persists.
A photo might help as well in case something is visually wrong.


Rides better than the spacer lift. I guess it is just stiff since I just put it in 2 weeks ago and only but 400 miles on it. Will post a pic when I get home.

_________________
2010 KK Liberty Renegade
Mods:
2 Hella 500 watt lights on front bumper
OME 2.5in lift
245/75r16 General Grabber at2
Cobra 75 WX ST
3ft firestik


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Sat Jan 10, 2015 6:35 pm 
Offline
LOST Newbie

Joined: Thu Oct 14, 2010 4:22 pm
Posts: 54
How long does it ride stiff/ take to break in? id like to have an idea im putting mine on next week

_________________
2010 Liberty
ATH front Bumber
Yakima Roof Basket
Hella 700FF
OME 3"" Lift (Top Plates + Rear Spring Isos)
Bf Goodrich At's 245/75/16
Mt Sinai, NY LONG ISLAND


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Sat Jan 10, 2015 6:52 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
oktane17 wrote:
How long does it ride stiff/ take to break in? id like to have an idea im putting mine on next week



No way to say in so many miles or so long of a time.
Depends on how you use yours, where you take it etc.
If you install it, then take it off road the next weekend and wheel it like you should , then a few weeks
If you go to the mall and back and forth to work, then month or longer

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Sat Jan 10, 2015 9:59 pm 
Offline
LOST Member
User avatar

Joined: Mon Apr 01, 2013 5:27 pm
Posts: 107
Location: Syosset, NY & Killington, VT
tommudd wrote:
oktane17 wrote:
How long does it ride stiff/ take to break in? id like to have an idea im putting mine on next week



No way to say in so many miles or so long of a time.
Depends on how you use yours, where you take it etc.
If you install it, then take it off road the next weekend and wheel it like you should , then a few weeks
If you go to the mall and back and forth to work, then month or longer


That makes sense then since i have not taken mine off road and just drove it to vermont and back since i installed the lift.

_________________
2010 KK Liberty Renegade
Mods:
2 Hella 500 watt lights on front bumper
OME 2.5in lift
245/75r16 General Grabber at2
Cobra 75 WX ST
3ft firestik


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 3:14 pm 
Offline
LOST Newbie

Joined: Tue Jan 28, 2014 3:40 pm
Posts: 62
Location: Dallas, TX
What if you go over some curbs at the mall, Tom?

_________________
Party,
Johnny

2012 Liberty 4x4 White


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 3:47 pm 
Offline
LOST Addict
User avatar

Joined: Sat Nov 23, 2013 8:57 pm
Posts: 2663
Location: Boise, Idaho
what I've found with mine is that those springs are really cushy if you hit them with enough force. I guess it has to due with the stages? The experts can explain better, but I found that if I hit bumps FASTER, the OME's are amazingly smooth. I drive 43 miles into the wilderness on one of the most remote roads in the country, and now I have a rig that I can cut that trip into 1/2 the time it used to take, all thanks to OME suspension :rockon: :JEEPIN:

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink&LCA's, OX rear,ARB front, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 4:45 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Mountainman wrote:
what I've found with mine is that those springs are really cushy if you hit them with enough force. I guess it has to due with the stages? The experts can explain better, but I found that if I hit bumps FASTER, the OME's are amazingly smooth. I drive 43 miles into the wilderness on one of the most remote roads in the country, and now I have a rig that I can cut that trip into 1/2 the time it used to take, all thanks to OME suspension :rockon: :JEEPIN:


The reason it feels better now is the fact that it does not bottom out on every pothole railroad track etc.
Before with worn springs and shocks plus being weak from the getgo, you felt each and every interruption in the road where as the springs and shocks now soak all of that up
Now if you think OMEs are amazingly smooth, ride in one with the JBA adjustable coilovers. :wink:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 4:47 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Johnny wrote:
What if you go over some curbs at the mall, Tom?


Well now it all depends on curbs in front of an Outdoor Store or a Bridal Boutique ........................................... :wink:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 8:16 pm 
Offline
LOST Addict
User avatar

Joined: Sat Nov 23, 2013 8:57 pm
Posts: 2663
Location: Boise, Idaho
hmm, now you got me thinking :JEEPIN:

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink&LCA's, OX rear,ARB front, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 8:37 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Mountainman wrote:
hmm, now you got me thinking :JEEPIN:



Sorry :roll: :roll: :wink:
But after running two different OME setups/ Ironman and now the JBAs
Just a world of difference. I'm so spoiled I hate driving any other KJ now :lol:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 11:11 pm 
Offline
LOST Member
User avatar

Joined: Mon Apr 01, 2013 5:27 pm
Posts: 107
Location: Syosset, NY & Killington, VT
Mountainman wrote:
what I've found with mine is that those springs are really cushy if you hit them with enough force. I guess it has to due with the stages? The experts can explain better, but I found that if I hit bumps FASTER, the OME's are amazingly smooth. I drive 43 miles into the wilderness on one of the most remote roads in the country, and now I have a rig that I can cut that trip into 1/2 the time it used to take, all thanks to OME suspension :rockon: :JEEPIN:


But the rear still rides rough. If I go over a speed bump the front is really smooth and the rear feels as if there's no springs or shocks.

_________________
2010 KK Liberty Renegade
Mods:
2 Hella 500 watt lights on front bumper
OME 2.5in lift
245/75r16 General Grabber at2
Cobra 75 WX ST
3ft firestik


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 11:21 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3100
Location: Philadelphia, PA
pwdrskier wrote:
Mountainman wrote:
what I've found with mine is that those springs are really cushy if you hit them with enough force. I guess it has to due with the stages? The experts can explain better, but I found that if I hit bumps FASTER, the OME's are amazingly smooth. I drive 43 miles into the wilderness on one of the most remote roads in the country, and now I have a rig that I can cut that trip into 1/2 the time it used to take, all thanks to OME suspension :rockon: :JEEPIN:


But the rear still rides rough. If I go over a speed bump the front is really smooth and the rear feels as if there's no springs or shocks.

I had this issue with my 4 inch lift until I replaced my rear sway bar links with longer ones. Before doing that, the sway bar was almost vertical, and so it didn't move out of the way well when the suspension needed to compress, like when going over a bump, and it transferred the jolt to the unibody. JBA's longer sway bar links fixed the issue for me, but they might be too long for a 2.5 inch setup.

A different explanation is that your rear bump stops are too tall, so there is very little room to compress the suspension over bumps. Did you extend your bump stops when installing the lift? JBA's extended bump stops are designed to be cut down to an appropriate height before installation, because they are too tall to begin with.

A third and different explanation is just that the springs aren't broken in yet. If you only have 600 miles on them so far, take them off road soon and put them thru their paces. It may be a couple thousand miles before they break in.

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 11:46 pm 
Offline
LOST Addict
User avatar

Joined: Sat Nov 23, 2013 8:57 pm
Posts: 2663
Location: Boise, Idaho
tommudd wrote:
Mountainman wrote:
hmm, now you got me thinking :JEEPIN:



Sorry :roll: :roll: :wink:
But after running two different OME setups/ Ironman and now the JBAs
Just a world of difference. I'm so spoiled I hate driving any other KJ now :lol:


Do I have to go over 3 inches with those JBA adjustables? I tend to push the boundaries of rolling this thing as is, so I'd hate to go any higher.

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink&LCA's, OX rear,ARB front, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Mon Jan 12, 2015 11:53 pm 
Offline
LOST Addict
User avatar

Joined: Fri Sep 09, 2011 9:14 pm
Posts: 2377
Location: Lindenhurst, New York
Mountainman wrote:
tommudd wrote:
Mountainman wrote:
hmm, now you got me thinking :JEEPIN:



Sorry :roll: :roll: :wink:
But after running two different OME setups/ Ironman and now the JBAs
Just a world of difference. I'm so spoiled I hate driving any other KJ now :lol:


Do I have to go over 3 inches with those JBA adjustables? I tend to push the boundaries of rolling this thing as is, so I'd hate to go any higher.


They make a 2.5" kit. The front is the same. You literally tighten 2 nuts to set the height. You can go from pretty much stock height to 4+".

_________________
2011 Deep Cherry Red KK - Skyslider - JBA/Bilstein Adjust-A-Strut set at 3.5" - OME 731 Rear Springs - Bilstein Rear Shocks - Al's A-arms - 245/75-16 Duratracs - Rock Liazard Super Sliders


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Tue Jan 13, 2015 11:49 am 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania -> Colorado
im a bit late here, but as we all know here I have the 2.5" spacers that gave me an actual 3.25" lift. I have Bilstien shocks in the front and stock in the rear currently. I went off-roading 2 weeks ago and the ride was VERY VERY harsh. when I was going 25mph or faster on the trail, the front (although I have heavy duty shocks on) was butter smooth and the rear was constantly popping (overextended) and rough. the ride quality currently is pretty smooth besides the still present bump steer. im looking to install Bilstien shocks on the rear next month.

spacer lifts do ride very harsh but are a great alternative to a full lift kit and are really not intended for long term use. me personally, I don't mind a harsh ride at all! on the trail is the only place I absolutely hate the spacers. and I guess me riding with 50psi in the winter doesn't help at all! 37psi in the spring summer and fall.

http://jeepinbyal.com/liberty-2008-2012-kk/rear-shocks-and-coil-springs/bilstein-heavy-duty-rear-shocks.html

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle -> Jasper for the long-term win!


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Tue Jan 13, 2015 12:31 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
PALiftedKK wrote:
im a bit late here, but as we all know here I have the 2.5" spacers that gave me an actual 3.25" lift. I have Bilstien shocks in the front and stock in the rear currently. I went off-roading 2 weeks ago and the ride was VERY VERY harsh. when I was going 25mph or faster on the trail, the front (although I have heavy duty shocks on) was butter smooth and the rear was constantly popping (overextended) and rough. the ride quality currently is pretty smooth besides the still present bump steer. im looking to install Bilstien shocks on the rear next month.

spacer lifts do ride very harsh but are a great alternative to a full lift kit and are really not intended for long term use. me personally, I don't mind a harsh ride at all! on the trail is the only place I absolutely hate the spacers. and I guess me riding with 50psi in the winter doesn't help at all! 37psi in the spring summer and fall.

http://jeepinbyal.com/liberty-2008-2012-kk/rear-shocks-and-coil-springs/bilstein-heavy-duty-rear-shocks.html


Your problem is running too high tire pressure
plus stock springs which are worn out PLUS you don't have the same amount of up or down travel one des with a full spring lift
Not sure how long you shocks are but springs are not giving you much flex in the rear. With that spacer in there you only have 3-4 inches before they are stacked
Then you get into the whole sway bar issues on the KKs

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Wed Jan 14, 2015 8:48 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
pwdrskier wrote:
But the rear still rides rough. If I go over a speed bump the front is really smooth and the rear feels as if there's no springs or shocks.


I wish I could stiffen up the ride on the rear of my KJ,running 320lbs rated coils(100lbs more then the stiffest KJ/KK rear coils) for a FJ80/100 with very stiff Bilstiens(278/78 valving) and it's way to soft.


Top
 Profile  
 
 Post subject: Re: OME Suspension question
PostPosted: Wed Jan 14, 2015 9:16 am 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania -> Colorado
tommudd wrote:
PALiftedKK wrote:
im a bit late here, but as we all know here I have the 2.5" spacers that gave me an actual 3.25" lift. I have Bilstien shocks in the front and stock in the rear currently. I went off-roading 2 weeks ago and the ride was VERY VERY harsh. when I was going 25mph or faster on the trail, the front (although I have heavy duty shocks on) was butter smooth and the rear was constantly popping (overextended) and rough. the ride quality currently is pretty smooth besides the still present bump steer. im looking to install Bilstien shocks on the rear next month.

spacer lifts do ride very harsh but are a great alternative to a full lift kit and are really not intended for long term use. me personally, I don't mind a harsh ride at all! on the trail is the only place I absolutely hate the spacers. and I guess me riding with 50psi in the winter doesn't help at all! 37psi in the spring summer and fall.

http://jeepinbyal.com/liberty-2008-2012-kk/rear-shocks-and-coil-springs/bilstein-heavy-duty-rear-shocks.html


Your problem is running too high tire pressure
plus stock springs which are worn out PLUS you don't have the same amount of up or down travel one des with a full spring lift
Not sure how long you shocks are but springs are not giving you much flex in the rear. With that spacer in there you only have 3-4 inches before they are stacked
Then you get into the whole sway bar issues on the KKs



I didn't mean to hijack this thread, just some personal knowledge

yes, I understand the rear shocks are limiting the flex capabilities. and replacing any part on my jeep honestly isn't a major rush because im in the middle of getting things straightened out with moving south this summer. but when I do get the time those rear shocks will be replaced. possibily along with a full suspension lift. and like I said, on road I really don't mind the harsh ride! the jeep killed my back and neck going over Virginias rocky and muddy trails. it was exactly the same as off roading with a jeep with no suspension.

what am I saying, you already know all of this!!! :BANANA:

and of curse moving south means more trail riding so a winch bumper is a nececity! don't want to be stuck again.

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle -> Jasper for the long-term win!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com