Does anyone have this installed or have a review? http://jeepinbyal.com/affiliate-product ... rkels.html

Ran my CRD down a 1.5ft deep stream for a few hundred yards last weekend and, needless to say, I was pretty worried I would hit a drop at any moment. A snorkel would have put me at ease... plus they look BA!

I've read a couple how-to-install guides on here, but no actual product reviews.

Thanks!

_________________
2005 KJ CRD
Frankenlift + plate
31x10.5x15 Duratracs
15x7 Black Rock Jack 929 w/ 4.5" BS
Powerstop drilled/slotted rotors/ pads
Wells/ bumper cut. Pinch welds. DIY bed liner'd Crossbars and grill. 8,000lb hitch. Tint. Debadge. Thule. Kenwood DDX470
Muffler delete. ORM

Weekend: 2008 135i. 400rwhp/ 450rwtq. 3,100lbs

Snorkel is only 50% of what you need, but if you do a search you'll find some who have installed

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

1) Use di-electric grease on all electrical connections under the hood
2) Install high quality spark plug wires
3) Raise all your vent lines as high as you can - front / rear axle / tranny
4) Wrap my gas cap with electrical tape

Would there be an issue with the fan?
Anything else I am missing?

Not looking at a snorkel simply for aesthetics.

_________________
2005 KJ CRD
Frankenlift + plate
31x10.5x15 Duratracs
15x7 Black Rock Jack 929 w/ 4.5" BS
Powerstop drilled/slotted rotors/ pads
Wells/ bumper cut. Pinch welds. DIY bed liner'd Crossbars and grill. 8,000lb hitch. Tint. Debadge. Thule. Kenwood DDX470
Muffler delete. ORM

Weekend: 2008 135i. 400rwhp/ 450rwtq. 3,100lbs

I've had my Air Flow on my KJ since they were first introduced into the US through Dirk at DPG off road, I believe around 2005/ 2006. I actually think I got it off a group buy from on here.

Fit is great, the only areas where it was kinda troublesome were the templates. I just measured a million times and cut once.




Sent from my iPhone using Tapatalk

_________________
Lyle
Middle River, MD
2002 sport
With many extras

Yep, the chap who fitted mine found that the templates were more of a rough guideline than a set of accurate markers! Use the templates as a guide only and measure, measure measure before you cut.

_________________
Light Khaki 2.8CRD: TJM alloy bumper; Skid Row &Asfir skids;ext. breathers; SAMCO hoses; Grabber At3 235/70/16; Fumoto; Euro TC; Odyssey PC1500;GDE FTEcotune; OME lift; lightforce driving lights;ARB diff cover;nylon fan+Hayden2905;ss vortex exhaust; Airflow snorkel; Frontrunner roofrack; rock rails

Owning a muffler shop, and being moderately handy with oxy/acy weld, wire weld, metal fab, I've thought I'd like to attempt building my own. Any closeup pics of various components, finished installs?

Bob

Picked mine up off someone new for $300 and paid $400 to have it installed by a 4x4 shop.

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.
31X10.5 Duratracs
Yukon / Motive Gear 4.10's
Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS