What have you done to your KK lately

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

Gave it a nice bath (that won't last long) and finally had time to install my rola roof basket!

Sorry that this picture is side ways, tried to rotate it but it doesn't save.

PALiftedKK · **Posted:** Tue Mar 24, 2015 2:10 pm

nFodzy wrote:

Gave it a nice bath (that won't last long)

lookin good!

the front of our KKs look more aggressive in the front. love how high the front sits. I use my front bumper as a seat sometimes.

Bmxer524 · **Posted:** Tue Mar 24, 2015 2:27 pm

PALiftedKK wrote:

nFodzy wrote:

Gave it a nice bath (that won't last long)

lookin good!

the front of our KKs look more aggressive in the front. love how high the front sits. I use my front bumper as a seat sometimes.

That's mostly because the lifts are like leveling kits and add more to the front. Like I sit at 21.5" all around. Stock is 18" in front, 19" in back. My 3.5" is only 3.5" up front and 2.5" in the rear.

lfhoward · **Posted:** Tue Mar 24, 2015 2:35 pm

nFodzy wrote:

Gave it a nice bath (that won't last long) and finally had time to install my rola roof basket!

Looking good Neal! The KK is just more BA with a roof basket on. It changes its whole personality,

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

@PALiftedKK thank you sir!

and Lauren, seeing your KK inspired me to purchase the basket so thank you!

PALiftedKK · **Posted:** Tue Mar 24, 2015 3:49 pm

Bmxer524 wrote:

That's mostly because the lifts are like leveling kits and add more to the front. Like I sit at 21.5" all around. Stock is 18" in front, 19" in back. My 3.5" is only 3.5" up front and 2.5" in the rear.

right. my front is an average of 3.25" rear sagged to an avg 2.80" or so. my front doesn't look as high as nFodzy's rig.

im guessing the wheel spacers make it look taller. idk, I don't have spacers yet.

my KK at 25,500 miles, has sagged very badly.

Erikg84 · **Posted:** Tue Mar 24, 2015 4:21 pm

nFodzy wrote:

Looks Great! Are you running wheel spacers? If so, what size?

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

Erikg84 wrote:

Looks Great! Are you running wheel spacers? If so, what size?

Yeah 1.25" spidertrax

NAMoulton1 · **Joined:** Tue Aug 12, 2014 7:01 pm **Posts:** 1054

Had to give her a jump...again. Got an ECL light so I finally got to use the Torque app to run for codes. Just as I thought, Powertrain Voltage Low. Been a good 6 years but time for a new battery...I'm really liking Interstate's MT7-AGM or Optima Yellowtop. What is everyone else running? Keep in mind I'm going to need something that can handle accessory loads too.

Bmxer524 · **Posted:** Tue Mar 24, 2015 7:02 pm

I think he's only at 3". It's his trimmed bumper that looks higher.

Gageraid · **Posted:** Tue Mar 24, 2015 9:09 pm

Black KKs make me drool. Nice Jeep!

toy4everyseason · **Posted:** Tue Mar 24, 2015 9:27 pm

NAMoulton1 wrote:

Had to give her a jump...again. Got an ECL light so I finally got to use the Torque app to run for codes. Just as I thought, Powertrain Voltage Low. Been a good 6 years but time for a new battery...I'm really liking Interstate's MT7-AGM or Optima Yellowtop. What is everyone else running? Keep in mind I'm going to need something that can handle accessory loads too.

I'm running an Optima Red top & it's been a champ. Does matter how cold it gets, it still cranks.

dcbelcher26 · **Posted:** Tue Mar 24, 2015 9:34 pm

NAMoulton1 wrote:

Had to give her a jump...again. Got an ECL light so I finally got to use the Torque app to run for codes. Just as I thought, Powertrain Voltage Low. Been a good 6 years but time for a new battery...I'm really liking Interstate's MT7-AGM or Optima Yellowtop. What is everyone else running? Keep in mind I'm going to need something that can handle accessory loads too.

I just put a yellow top in mine! Pepboys has a 30% off deal for online orders. Order it online and pick up in store. I only paid around $170 in end for a $240 battery! My jeeps never started better and it has side terminals for all those extra wires

Sent from my iPhone using Tapatalk

libertygirl09 · **Posted:** Tue Mar 24, 2015 9:42 pm

It's been a while since I posted so here's the run down...
First I added a USB port into my center console

Second: I added a switch pannel into my a pillar

Third: I added some OLB pod led lights

Fourth: got an ATH bumper !

Then I put it on.....

Fifth: I bought a cree led light bar

Sixth: I got a strut spacer

Seventh: one inch spacers

Eighth: this water leak ...

&&&&&&&
Lastly Merica!

Erikg84 · **Posted:** Tue Mar 24, 2015 9:59 pm

Nice! You've been busy LibertyGirl! What wheels are you running?

lfhoward · **Posted:** Tue Mar 24, 2015 10:38 pm

That's a great looking KK! The ATH bumper is just awesome. I like what you've done with your electrical mods. The USB in the center console and the switches on the A pillar are both cool. I think you may be the first KK owner to position them there (especially the switches), but it looks like it works esthetically. The only thing I am wondering about are the 1 inch wheel spacers. How differently does it drive now that you have those installed? I'd be a little worried about extra wear an tear on wheel bearings and ball joints, but if you keep a watchful eye on everything you should be fine.

NAMoulton1 · **Joined:** Tue Aug 12, 2014 7:01 pm **Posts:** 1054

Went on Amazon to buy a few things for my electrical wiring. Turns out I had completely forgotten about my gift card balance of $160...so I bought some skids...WINNING!

libertygirl09 · **Posted:** Tue Mar 24, 2015 11:52 pm

lfhoward wrote:

That's a great looking KK! The ATH bumper is just awesome. I like what you've done with your electrical mods. The USB in the center console and the switches on the A pillar are both cool. I think you may be the first KK owner to position them there (especially the switches), but it looks like it works esthetically. The only thing I am wondering about are the 1 inch wheel spacers. How differently does it drive now that you have those installed? I'd be a little worried about extra wear an tear on wheel bearings and ball joints, but if you keep a watchful eye on everything you should be fine.

Thank you so much! The spacers have been on for a week and I don't plan on keeping them for a long time. I just redid my ball joints so I'm not too worried about those and hopefully things will just be okay, I maintain everything closely - as I work on my jeep at a shop almost every Saturday and everything gets looked over almost every week! Hope for the best

Thanks for the awesome feedback

libertygirl09 · **Posted:** Tue Mar 24, 2015 11:53 pm

Erikg84 wrote:

Nice! You've been busy LibertyGirl! What wheels are you running?

I'm running pro comp rims 16inch. With 31inch duratracs for now, till I go to 33s

Texasrugby911 · **Joined:** Thu Feb 04, 2010 3:18 pm **Posts:** 196

NAMoulton1 wrote:

Went on Amazon to buy a few things for my electrical wiring. Turns out I had completely forgotten about my gift card balance of $160...so I bought some skids...WINNING!

Ha Ha, way to go buddy, wish I had a credit on my Amazon account... :mrgreen:

What have you done to your KK lately

Who is online