It is currently Fri Oct 30, 2026 1:09 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Questions About Skids
PostPosted: Thu Apr 02, 2015 8:19 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
I've been putting off getting skids for a while now.
Where's the cheapest place to get them?
There is a dealership a couple of miles away from my house...
If I get skids, it'd be hard to say no to the off road trip coming up.
Also curious what skids would do to gas mileage.
Would skids make the Jeep's ride quality change at all because of extra weight?

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 8:23 pm 
Offline
LOST Addict
User avatar

Joined: Tue Aug 12, 2014 7:01 pm
Posts: 1054
Amazon was the cheapest place I found the transmission and transfer case skids at (Just over $100 for the two plus shipping for one of them). I found the engine skid for $78 plus $20 shipping online at a weird place. Had PayPal so I trusted it haha.

As for the weight, it's MAYBE another 30lbs...(not sure on gas tank skid...) high doubt you'll see a ride difference.

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 8:26 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
When Lauren was over my house not long ago, the skids actually look aerodynamic to an extent...
Really, that's all they weigh?
Those sound like reasonable prices for their function.
Looks like I may have to do the old remove the headlight trick for doing future oil changes.

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 8:37 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
Found this great thread.
viewtopic.php?f=88&t=69504&start=20

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 8:44 pm 
Offline
LOST Addict
User avatar

Joined: Tue Aug 12, 2014 7:01 pm
Posts: 1054
Gageraid wrote:
When Lauren was over my house not long ago, the skids actually look aerodynamic to an extent...
Really, that's all they weigh?
Those sound like reasonable prices for their function.
Looks like I may have to do the old remove the headlight trick for doing future oil changes.


Ish, they're just under the crossmembers (1/2 the bolts go in the crossmembers)

The Transmission skid weight 10lbs, transfer weighs about 5lbs...tops...not sure on engine skid...just bought it today (didn't know transmission NEEDED the engine skid...sigh...)

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 8:48 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3100
Location: Philadelphia, PA
I checked carefully for a change in gas mileage when I added my skids and sliders. Really, there is zero effect on MPG's. At least nothing my Scangauge could detect, and nothing that showed up on Fuelly when calculating MPG the old fashioned way. This was before my roof rack, lift, and larger tires.

Back in July of 2012, I compared Jparts.com, Justforjeeps.com, FactoryMoparParts.com, and MoparOnlineParts.com. FactoryMoparParts.com edged out the others because they shipped the whole kitten kaboodle to me for just $31.

7/2012 pricing:
KJ Tow hooks: $97
Transfer case skid: $48
Transmission skid: $48
Front suspension skid: $75
Gas tank skid: $219 (comes with extra bolts you can use on the radiator skid)
Radiator skid: $29 (need to get 2 nutserts from dealer)
TOTAL: $418

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 8:51 pm 
Offline
LOST Addict
User avatar

Joined: Tue Aug 12, 2014 7:01 pm
Posts: 1054
Skid Plate Instructions:

Engine: http://www.moparonlineparts.com/docs/82210769.pdf
Transmission: http://www.moparonlineparts.com/docs/82210003.pdf
Transfer Case: http://www.moparonlineparts.com/docs/82210937.pdf
Gas Tank: http://www.moparonlineparts.com/docs/82210936.pdf

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 8:54 pm 
Offline
LOST Addict
User avatar

Joined: Tue Aug 12, 2014 7:01 pm
Posts: 1054
lfhoward wrote:
I checked carefully for a change in gas mileage when I added my skids and sliders. Really, there is zero effect on MPG's. At least nothing my Scangauge could detect, and nothing that showed up on Fuelly when calculating MPG the old fashioned way. This was before my roof rack, lift, and larger tires.

Back in July of 2012, I compared Jparts.com, Justforjeeps.com, FactoryMoparParts.com, and MoparOnlineParts.com. FactoryMoparParts.com edged out the others because they shipped the whole kitten kaboodle to me for just $31.

7/2012 pricing:
KJ Tow hooks: $97
Transfer case skid: $48
Transmission skid: $48
Front suspension skid: $75
Gas tank skid: $219 (comes with extra bolts you can use on the radiator skid)
Radiator skid: $29 (need to get 2 nutserts from dealer)
TOTAL: $418


Do you write down and save everything, Lauren? I feel as if you could give the date and time and what brand was your first oil change with your first car ever...

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 8:58 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
I don't plan on getting the gas tank skid right away.
You guys have given me good info so far, I appreciate it!

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 9:04 pm 
Offline
LOST Addict
User avatar

Joined: Tue Aug 12, 2014 7:01 pm
Posts: 1054
I've been doing skid research for the past few days so it's all readily available!

GET THE SKIDS AND GO TO RAUSCH!

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 9:15 pm 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1236
Heres what the mopar transfer skid weights

Image


And heres the one that i made. 1/4" plate.

Image

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 9:20 pm 
Offline
LOST Addict
User avatar

Joined: Tue Aug 12, 2014 7:01 pm
Posts: 1054
According to Amazon the shipping weight for the skids are:

Engine: 18lbs
Transmission: 20lbs
Transfer Case: 10lbs


Thanks 4x4kayak for correcting me haha

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 9:45 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3100
Location: Philadelphia, PA
NAMoulton1 wrote:
Do you write down and save everything, Lauren? I feel as if you could give the date and time and what brand was your first oil change with your first car ever...

Ha ha, well, I did have that skid plate info in an excel file. :)

With this Jeep, I've kept a spreadsheet on iCloud of all the maintenance and mods I've done. So, I have a record of when I did certain things, and when scheduled maintenance is due. I don't keep a record on my spreadsheet of how much money I've sunk into the Jeep... I want to stay positive! :D

Now my first car ever was a '93 Dodge Shadow. I didn't do any of my own oil changes or my own maintenance, besides washing and detailing it. On my next car, an '02 Dodge Neon, I changed spark plugs for the first time. Then, when I got my first Jeep, an '00 Jeep Cherokee, I got myself a Haynes Manual and joined CherokeeForum and really started doing oil changes, spark plugs, cleaning the IAC, changing the blower motor resistor, rotating tires, etc. I got the Jeep bug with that one! And that Jeep was a diva. Lots of stuff to fix all the time! But didn't keep detailed records. Now with the '08 KK I am doing more in depth stuff like brakes and suspension work, and keeping good records of what was done and when.

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Thu Apr 02, 2015 10:05 pm 
Offline
LOST Addict
User avatar

Joined: Tue Aug 12, 2014 7:01 pm
Posts: 1054
I've started 3 different log books...and then forget after the next 2500mi hahaha.

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Sat Apr 04, 2015 1:14 am 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
Can someone confirm the radiator skid plate part number?
I seen 2 or 3 different part numbers in various threads.
Can't figure out if it ends in AA, AB, or AC.

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Sat Apr 04, 2015 8:04 am 
Offline
LOST Member
User avatar

Joined: Mon Mar 04, 2013 7:10 pm
Posts: 307
Location: Detroit, MI
Gageraid wrote:
Can someone confirm the radiator skid plate part number?
I seen 2 or 3 different part numbers in various threads.
Can't figure out if it ends in AA, AB, or AC.


You want AC (unless AD is out there). The two letters at the end are the change level. Changes can be minor, like going to parts made from a different tool, to fairly major. As long as it is reverse compatible, the 8 numbers will be the same.

Here is a write-up I did on installing it. viewtopic.php?f=104&t=76967 You can get it in without taking the bumper off, but the engine skid has to be off and it requires some finagling. The best thing to do is hand start all the bolts and get everything lined up before torquing them down.

It might be a bit late to start now, but if you bench press a lot, it will help you with getting the plates in the right spot. :-)r

_________________
2008 Liberty Sport
OME Lift, JBA A-Arms + Track Bar
245/75/16 Nokian Rotiiva AT Plus
Numerous junkyard upgrades


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Sat Apr 04, 2015 1:06 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
Thanks for the info. I wanna get these installed a.s.a.p. especially with the better weather we've been having.

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Sat Apr 04, 2015 8:44 pm 
Offline
LOST Addict
User avatar

Joined: Tue Aug 12, 2014 7:01 pm
Posts: 1054
Just get an ATH bumper, no need for a MOPAR radiator skid...teehee

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Sun Apr 05, 2015 1:56 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
NAMoulton1 wrote:
Just get an ATH bumper, no need for a MOPAR radiator skid...teehee


Okay lol. I'd love to support Morgan one day and buy one of his products, but haven't found one yet that I'd like to purchase.

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: Questions About Skids
PostPosted: Sun Apr 05, 2015 2:24 pm 
Offline
LOST Member
User avatar

Joined: Sun Oct 06, 2013 1:30 pm
Posts: 389
After you purchase them all, let us know where you chose to buy them from and how much! I think skids are gonna be my next big purchase besides A-arms.

_________________
2011 Brilliant Black KK Sport - 3" OME/Bilstein & JBA UCA's, 245/75r16's & other goodies


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Majestic-12 [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com