Done a lot in the past 3 months...
Artic Camo Vinyl
Extra Lift to the OME front and rear (Clevis and Spring Isolators)
JBA UCA/Lower Ball Joints/Rear UCA
Mounted all my ASFIR Skids again
10" Rigid S2 Driving LED mounted inside 4xGuard Bumper (middle section only)
Cooper STT PRO 245-75R-16s...very aggressive

Last thing to do is design front bumper ends for the 4xGuard that don't block the fog lights and have supports
thru the front plastic facia for strength

_________________
Founder of L.O.S.T.
2006 CRD Sport
Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph

Looks great. Really like the white/gray camo. Who makes the bumper your running?

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.

4xGuard (Matrix) thru Jeepinbyal

_________________
Founder of L.O.S.T.
2006 CRD Sport
Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph